Separate LANs with

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Separate LANs with

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Separate LANs with
Separate LANs with
2022-01-17 17:05:32
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.1.1

I try to setup two different LANs separated from each other. LAN setup works as expected but the gateway routes between the nets. (Which is ok BUT) I see no opportunity to separate them from each other. Gateway ACL doesn't work: "Rules of Gateway ACL take effect only on the traffic which is sourced from LAN ports and forwarded to the WAN ports." Is there something I missed?

 

I only found this: https://www.tp-link.com/en/support/faq/3091/

 

But I want the separation on the gateway not switch.

  0      
  0      
#1
Options
2 Reply
Re:Separate LANs with
2022-01-19 05:26:41

@S-K 

 

As far as I know, the settings you want are not yet supported in Controller mode, but setting LAN-LAN ACLs is supported in Standalone mode.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Separate LANs with
2022-01-20 08:31:35

@S-K Well I do want to use configuration via controller. I hoped that I could solve my issue without buying an omada switch just for separating (V)LANs.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 576

Replies: 2

Related Articles