T2600 poe 28 port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T2600 poe 28 port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T2600 poe 28 port
T2600 poe 28 port
2022-03-15 09:04:32
Hardware Version: V4
Firmware Version:

I bought two of these switchs and one used the old GUI and one uses the new gui...They are both v4 hardward version so if i upgrade the firmware will the older switch upgrade to the newer GUI?

  0      
  0      
#1
Options
5 Reply
Re:T2600 poe 28 port
2022-03-16 01:39:38

  @LEN0272 

If they are on the same hardware version, I think this can be fixed with the firmware update. Simply they have different firmware when they're out from the factory. 

https://www.tp-link.com/en/support/download/t2600g-28mps/#Firmware

  0  
  0  
#2
Options
Re:T2600 poe 28 port
2022-03-19 15:18:43

  @John1234 Thank you...I am going to try to upgrade the switch to use the newer managment page..

  0  
  0  
#3
Options
Re:T2600 poe 28 port
2022-03-27 09:11:38
On the back on one of the t2600 switches there is two Numbers with two firmware versions... T2600 28MPS V2.0 TLSG 3424P V4.0 The other switch only has the one model number with hardware version...I tried to paste the picture of the tag but would not let me...Thanks
  0  
  0  
#4
Options
Re:T2600 poe 28 port
2022-04-04 12:48:00

  @LEN0272 

If (SG3424) is in the brackets after the model T2600G-28MPS, you are clear to go with the firmware upgrade. That means you need to download the latter V4 firmware. What this model number tells you is that your device actually has the same chipset and is compatible with the firmware with SG3424 V4.

  0  
  0  
#5
Options
Re:T2600 poe 28 port
2022-04-09 10:44:57

  @John1234 Thank you...I bought these for Omada and realized they wont work...I will give the upgrade a go.....

  0  
  0  
#6
Options