Pre-recorded Time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Pre-recorded Time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Pre-recorded Time
Pre-recorded Time
2022-03-20 21:58:17
Model: VIGI NVR1008  
Hardware Version: V1
Firmware Version: NVR1016H(UN)_V1_210825

Hello folks, i have a trable with the Pre-recorded Time setting. By default, it is set to 5 seconds, but recording starts 1-2 seconds after the event occurred (motion detection). I tried changing the time to 1, 3, 10, 15, 20 and 30 seconds, but nothing changed. It looks like this setting doesn't work.

 

Model:

NVR1016H(UN)_V1

Firmware:

NVR1016H(UN)_V1_210825

 

Cameras:

4th tapo c310v1

  0      
  0      
#1
Options
3 Reply
Re:Pre-recorded Time
2022-03-21 05:59:18

Dear @Metalruler

 

Metalruler wrote

Hello folks, i have a trable with the Pre-recorded Time setting. By default, it is set to 5 seconds, but recording starts 1-2 seconds after the event occurred (motion detection). I tried changing the time to 1, 3, 10, 15, 20 and 30 seconds, but nothing changed. It looks like this setting doesn't work.

 

Could you please provide a screenshot to show your issue?

How did you confirm this function doesn't work?

 

Best Regards!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Pre-recorded Time
2022-03-21 13:18:30

  @Hank21 

Maybe I didn't describe the problem clearly. The Pre-recorded Time is needed to compensate for the motion detection delay. For any value of the parameter (1-30 sec), recording starts at the moment of motion detection. I came to this conclusion by watching the recorded videos.

Although, with a parameter value of 5 seconds, the recording should start 5 seconds earlier of the event detection.

 

Hope this clear.

Thanks

  0  
  0  
#3
Options
Re:Pre-recorded Time
2022-08-11 18:58:25 - last edited 2022-08-11 18:59:24

  @Metalruler 

Hi, did you manage to change the recording time to make it longer ?

How can you change the recording length on the NVR ?

  0  
  0  
#4
Options