Knowledge Base MC220L temperature SFP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, it's possible to see the temperature of SFP fit into mediaconverter?
Thanx
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
This is only a converter, which cannot be seen.
As for the operating temperature, the spec sheet on the official website refers to:
https://www.tp-link.com/en/business-networking/accessory/mc220l/#specifications
- Copy Link
- Report Inappropriate Content
This is only a converter, which cannot be seen.
As for the operating temperature, the spec sheet on the official website refers to:
https://www.tp-link.com/en/business-networking/accessory/mc220l/#specifications
- Copy Link
- Report Inappropriate Content
Thank You
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
It is possible to view the temperature of an SFP that is fit into a media converter. You can do this by using a thermometer or an infrared camera to read the temperature of the SFP. If the temperature is too high, it can be an indicator of a problem with the SFP or the media converter.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes, it is possible to see the temperature of an SFP (Small Form-Factor Pluggable) transceiver fitted into a media converter. Many media converters come with monitoring capabilities that allow you to view important information about the SFP module, including temperature readings.
You can usually access this information through the media converter's management interface or software.
netsworths
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
Unfortunately, the media converter we have do not support that.
The media converter is a simple product that converts the optical signal. It does not help monitor the temperature of the SFP module and no software is built in it.
- Copy Link
- Report Inappropriate Content
@super80 Yes, it's possible. Check the SFP's datasheet or use a monitoring tool. Good luck!
- Copy Link
- Report Inappropriate Content
@Zubairsk Thank You
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1353
Replies: 10
Voters 1