Internet Cafe style token/Wifi Access
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I help run a communial hall in the UK and need to upgrade the wifi coverage. We have 100Mb Sychronous FTTP broadband but only 802.11.a/b/g Turbo 2.4Ghz POE access points.
I would like to change the access points to EAP245's as I have these at home and they give faultless covearge and can be configured with the Omada software.
At the moment we have a single SSID and password which we have to give out to the hirers of the hall. However I would like to use time limited tokens or pin codes so that the hirer has access during their hire period but it expires shortly afterward.
I belive the Omada software is capable of setting up tokens which might achive what I need but the maintenance of this method would be too onerous. I assume I would have to set up a new user for every hire?
Is there a way of automating this so that the pin/token relates to the date i.e. the pin/token expires at midnight and changes every day?
The alternative is to have some other software on the network like they use in Internet Cafe's but I believe this is installed on a dedicated router?
Any suggestions would be welcomed.
Hey Fozzie
Sounds like you have done your homework, yes the EAP225 would likely be a good choice for you. You would also need an controller to allow the portal access and enable roaming / bandsteering etc, something like the OC200 should be fine.
Im guessing you have an existing switch? If so is it POE and does it support 802.3 af/at POE? Be worth checking that as older models sometimes do not and you may find the APs dont power up correctly as a result. Capacity wise budget around 10watts per AP, likely less than that but better to overspec!
In answer to your question about portal access. The pin code tickets can be generated in mass and stored for use when needed. I havent tried this personally but looking at the setup, it seems its possible to have pre-generated codes that can be used by mutliple users and will expire after X hours from activation.
In theory that setup above should allow 10 users to use the same code (6 random digits) and it will expire / kick the users after 8 hours from first activation. Therefore you could hand out that voucher anytime, they can then use it when in the hall (with 9 others) and after 8 hours the voucher is expired, everyone off 
You could just keep a list of these codes and hand one out when the booking of hall is made.
@Philbert Many thanks for your reply. I have just installed a Netgear GS516TP 16 port Gigabit switch with 8 ports POE that should be fine with the new APs. I am sure it supports af/at but will double check. I had planned to get the EAP245 or even the EAP265 which appears to be identical with the exception of af/at support.
I will look into the features in more detail to see if bulk token creation will do what I need. Ideally I would have loved it to integrate with our Building Management System that creates a pin code for door entry
You mention having a OC200 controller? Can I only do what you suggest with a dedicated hardware controller or will the Omada cloud software not do what I need?