I'm encountering a weird issue. I had some EAP610's that I pulled off another network (forgot them from OmadaSDN prior to removal) and decided that I would try them out in my house and replace my EAP245 and EAP225 (via MESH). Adopted the 610's in (both 1.0.2 firmware on OmadaSDN 5.5.6 on x86 and they appear to provision correctly however, neither one is advertising the SSID. Both advertise the standalone SSID when I release them from Omada.

I also tried downgrading firmware to 1.0.1. Both of these APs came off a system running 5.5.6 system where they were both functional as well. Any ideas? Maybe a OmadaSDN issue but again, Omada continues to function through all of this with the EAP2x5's