OID 1.3.6.1.4.1.11863.10.1.1.1.0 does not work with EAP610
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi.
I use that OID to get the number of current clients. It does work very well with EAP245 an EAP225.
Can not get it running with EAP610 - any advice ?
M
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I was offered a new firmware from tp-link support:
EAP610v3_1.3.90_[20230821-rel62568]_up_signed
It helped ! :)
- Copy Link
- Report Inappropriate Content
Hello @Mikolaj,
Thanks for your valuable feedback.
The OID is the switch's private nodes, it is not available for the EAPs.
- Copy Link
- Report Inappropriate Content
Upgrade to 1.4.0 was not much helpfull.
OID 1.3.6.1.4.1.11863.10.1.1.1.0 it does work with EAP225 and EAP245
If you test that OID on EAP610 it does exist but with no value:
2023-08-15 11:53:46 (2 ms) : Device: 192.168.xxx.xxx
2023-08-15 11:53:46 (13 ms) : SNMP v1
2023-08-15 11:53:46 (26 ms) : Custom OID 1.3.6.1.4.1.11863.10.1.1.1.0
2023-08-15 11:53:46 (61 ms) : SNMP Datatype: ASN_INTEGER
2023-08-15 11:53:46 (73 ms) : -------
2023-08-15 11:53:46 (85 ms) : Value: 0
2023-08-15 11:53:46 (95 ms) : Done
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Model:
EAP245(EU) v3.0
Firmware Version:
5.0.6 Build 20220429 Rel. 44315
Model:
EAP225-Outdoor(EU) v1.0
Firmware Version:
5.1.0 Build 20220926 Rel. 62456
- Copy Link
- Report Inappropriate Content
Hi @Mikolaj,
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230837779, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
I was offered a new firmware from tp-link support:
EAP610v3_1.3.90_[20230821-rel62568]_up_signed
It helped ! :)
- Copy Link
- Report Inappropriate Content
Hi @Hank21 ,
I have same trouble with snmp OID 1.3.6.1.4.1.11863.10.1.1.1.0
I tried to upgrade FW of EAP610(EU) v3.0 with latest beta FW at https://static.tp-link.com/upload/beta/2023/202308/20230802/EAP610(EU&US)_V3_1.4.0_Build20230718(Beta).zip
unfortunately both of my EAP610 does not return WiFi connected clients.
snmpwalk output: .1.3.6.1.4.1.11863.10.1.1.1.0 = INTEGER: 0
this is working well with
EAP610-Outdoor(EU) v1.0 / fw 1.2.0
.1.3.6.1.4.1.11863.10.1.1.1.0 = INTEGER: 14
EAP653(EU) v1.0 / fw 1.0.9
.1.3.6.1.4.1.11863.10.1.1.1.0 = INTEGER: 10
any ideas how to fix SNMP of EAP610 ?
- Copy Link
- Report Inappropriate Content
Hello @RadekCZ，
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230910645, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Hi, I can confirm that FW offered by support EAP610v3_1.3.90_[20230821-rel62568]_up_signed.bin solved this issue.
Thank you
- Copy Link
- Report Inappropriate Content
Hello @RadekCZ，
Thank you for your valued feedback! Glad to hear that your concern was resolved finally.
Hope you enjoy the Internet with TP-Link products and have a great day!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1256
Replies: 10
Voters 0
No one has voted for it yet.