cpe710 problems disconnecting
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi I have disconnection problems with 2 cpe710, firmware version CPE710 (UN) _V1_20211216. During the day there are disconnections that can last 5 minutes 10, 20 sometimes even 1 hour. The distance is about 900mt.
In 2021 I had a similar problem with the cpe510, solved by tp-link with beta firmware to be installed on the cpe510 master. How can I fix on the cpe710. ??? Thank you
@Tecnoscacco just curious, and it may be unrelated to your issue, but why do have them set to "feed only - 7dbi". Its my understanding that this mode is for use without the reflector and it sends the signal back in the opposite direction. I assumed since you mentioned, and show settings for two CPE710s, that one is linked to the other. I don't think you would want "feed only". I understand you may still have the dish in place, but it would seem the signal is reduced 7dbi. I may be wrong.
@Tecnoscacco just curious, and it may be unrelated to your issue, but why do have them set to "feed only - 7dbi". Its my understanding that this mode is for use without the reflector and it sends the signal back in the opposite direction. I assumed since you mentioned, and show settings for two CPE710s, that one is linked to the other. I don't think you would want "feed only". I understand you may still have the dish in place, but it would seem the signal is reduced 7dbi. I may be wrong.