RE: AP MODE MAX DISTANCE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE: AP MODE MAX DISTANCE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE: AP MODE MAX DISTANCE
RE: AP MODE MAX DISTANCE
2022-10-24 10:46:16
Model: TL-ANT5819MS  
Hardware Version: V1
Firmware Version:

Hello,

 

Setting up a P2MP network using WBS510 + TL-ANT5819MS with connecting clients CPE510 and CPE610/710.

 

Would like to know the max distance in AP mode. Did some searching with no luck. Maybe someone here has answers.

 

The base station is only visible to about 20-30 meters!

 

Faulty antenna or base station? or both?

 

TIA

  0      
  0      
#1
Options
4 Reply
Re:RE: AP MODE MAX DISTANCE
2022-10-25 04:51:34

  @stmon

 

Could be settings issue, what Transmit power did you choose?

 

It can be found on the WBS510 Wireles settings page.

  0  
  0  
#2
Options
Re:RE: AP MODE MAX DISTANCE
2022-10-25 08:59:52

  @Somnus 

 

transmit power is set to maximum. put up a cpe510 on the same pole a feet below and was able to connect a cpe610 at 1.16km away with no issues.

 

something is definitely wrong with WBS510 + TL-ANT-5819MS. its transmitting like a home router only visible to a few meters

 

who or what could be causing this issue?

 

TP-LINK support is unreliable

 

 

  0  
  0  
#3
Options
Re:RE: AP MODE MAX DISTANCE
2022-10-26 03:40:02

  @stmon 

 

Maybe the antenna is not installed correctly? Try unplugging the TL-ANT-5819MS and checking if there is any difference on the SSID signal. Perhaps the antenna is just not taking effect.

  0  
  0  
#4
Options
Re:RE: AP MODE MAX DISTANCE
2022-10-26 07:19:16

  @Somnus 

 

I'm a bit bothered when you said that the antena is not yet taking effect. It's strange to comprehend from a product that you expect to work right out of the box. I made sure that the connections are tight as it is not easy bringing down a 20foot pole on top a 130 foot hill. I also took the average calculation of the down tilt to ensure that the clients can achieve at least 95% visibility on the base station.

 

TP-LINK support is still struggling to comprehend the situation.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 408

Replies: 4

Related Articles