Hello,

I have a TP Link ER605 router connected to my ISP router. I want to create 3 x Vlans.

Main vlan, vlan 2 and vlan 3 and assign them on ports on the ER605

Main vlan must be able to communicate with vlan 2 and vlan 3.

Vlan 2 and vlan 3 must no be able to communicate.

If setup on omada controller I cannot set vlans according to ports on ER 605 as you need a omada switch for that.

If setup as standalone i can setup the 3 x vlans and assign the ports and they connect each with their own IP range and receive internet so that is working 

But all 3 are isolated I cannot get my main vlan to communicate with vlan 2 and vlan 3.

Is this possible to do with this router without adding a switch?

Regards