18
Votes

ER7212PC can't assign profiles to switch ports.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
 
18
Votes

ER7212PC can't assign profiles to switch ports.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
48 Reply
Re:ER7212PC can't assign profiles to switch ports.
2023-01-23 20:16:20

It should definitely be possible to assign the PVID!

I have the same problem with the ER7206.

I would like to swap my OC200, ER7206 and 8Port PoE switch for the ER7212 - but as of now it doesn't make sense.
Please let me know if that works and I'll be ready to buy it.

#25
Options
RE:ER7212PC can't assign profiles to switch ports.
2023-01-23 22:48:44
It should be possible to configure VLANs on the router itself using untagged ports and with their own DHCP assigned IP ranges.
#26
Options
Re:ER7212PC can't assign profiles to switch ports.
2023-01-24 09:38:19

Hey

I'm still struggling to adapt the ER7212PC to my network with no success.

My current setup consists of:

ONT > ER605v2 > TL-SG2218 > 2 x EAP115v4 > EAP110v3 Outdoor + OC200v2

Ultimately, it will be:

ONT > ER7212PC > TL-SG2218 > 2 x EAP115v4 > EAP110v3 Outdoor

I have already reset all devices to factory settings and started setup from the begining.

After the first start and configuration of Omada and entering the login details PPPoE internet

works everywhere. Unfortunately, when I do the adaptation of TL-SG2218 and EAP points

i completely lose internet access on all TL-SG2218 and EAP LAN ports.

Internet works only on all ER7212PC LAN ports.

Unfortunately, I can't handle it. Does anyone know why this is happening?

 

It looks as if the ER7212PC clashes with the TL-SG2218.

The question is which ER7112PC ports can be used to connect to the TL-SG2218?

I use POE ports 5 to 12.

Maybe that's the problem.

#27
Options
Re:ER7212PC can't assign profiles to switch ports.
2023-01-30 12:37:10

Does anybody using an ER7212PC know or could test if the DNS server is able to resolve local host names?

Mostly that would be DHCP allocations given out by the DHCP server.

 

The ER605 has the problem that it doesn't, so I was just wondering if this is the same for the ER7212PC?

(See this topic for info: https://community.tp-link.com/en/home/forum/topic/542472)

#28
Options
Re:ER7212PC can't assign profiles to switch ports.
2023-03-03 02:58:31 - last edited 2023-03-03 03:00:07

Would anyone be able to verify below? It appears to be fixed on Valentine's Day 2023.

 

 

UPD: PVID is available for ER7212PC in the last beta FW from 14022023

 

https://community.tp-link.com/en/business/forum/topic/592158?replyId=1176130

 

 

 

#29
Options
Re:ER7212PC can't assign profiles to switch ports.
2023-03-25 22:51:03

  @HGT version ER7212PC(UN)_V1_1.0.3 Build 20230314 seems to include this capability:

"Add support for modifying port PVID."

 

I updated but clueless on how to this... any tips?

#30
Options
Re:ER7212PC can't assign profiles to switch ports.
2023-03-26 15:02:04 - last edited 2023-08-02 03:46:31

  @BacanoM 

I have installed it and I was able to create "Camera" profile with VLAN 51, enable it for ports LAN5 and LAN6 as seen here

 

and then assign PVID 51 to those two ports here:

After this and cameras restart, two cameras connected to ports LAN5 and LAN6 become part of this VLAN and subnet 192.168.51.0/24

 

#31
Options
Re:ER7212PC can't assign profiles to switch ports.
2023-03-27 00:38:50

  @sradman thanks for the detailed guidance. Working like a charm! yes

#32
Options
Re:ER7212PC can't assign profiles to switch ports.-Solution
2023-04-25 04:24:19 - last edited 2023-04-25 04:24:22

Hello @LordPayder and other community members,

 

LordPayder wrote

I already updated the firmware to ER7212PC(UN)_V1_1.0.1 Build 20221106 and did a factory reset.

The switches are still at the post office, so I can currently only test with the ER7212PC.

 

Under "Devices" I can't find a "Ports" tab on the ER7212PC to assign defined profiles to the individual ports.

 

I'd like to update this feature request here.

 

The following firmware version has added support for modifying port PVID.

ER7212PC V1_1.0.3 Official Firmware (Released on Mar 21st, 2023)

 

Please take your time to update the firmware for confirmation.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
#33
Options
Re:ER7212PC can't assign profiles to switch ports.
2023-04-25 08:23:33

Hello @Fae 

I'm glad to hear that the missing feature is now available.
@sradman has already confirmed that it works and even provided instructions - thanks for that.

#34
Options

Voters 17

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 13 Voters