Business Community > All Threads > ER605 VPN cannot access LAN port 5001
< All Threads

ER605 VPN cannot access LAN port 5001

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 VPN cannot access LAN port 5001

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 VPN cannot access LAN port 5001
ER605 VPN cannot access LAN port 5001
2023-02-10 22:05:32 - last edited 2023-02-10 22:09:08
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.1 Build 20230115 Rel.77774

Hello,

I just bought this router and setup so far worked flawless. I have an L2TP client to LAN VPN Tunnel established and it works. My client pool is 192.168.10.10 - 192.168.10.20 and the local IP for the client is 192.168.100.128. I can see the tunnel in the tunnel list and I can access LAN clients via IP such as 192.168.100.41. However when I try to access an IP with a defined port such as 192.168.100.41:5001 the connection times out. Am I missing a port configuration? Or something else? This worked fine on my previous edge router.

Thank you!

  0      
 
  0      
 
#1
Options
4 Reply
Re:ER605 VPN cannot access LAN port 5001
2023-02-13 08:55:37

  @Bistromatic 

 

If you try to access the 192.168.100.41:5001 from other PC in the local LAN, can you access?

Have you tried setting a port forwarding rule to test? For the port 5001.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:ER605 VPN cannot access LAN port 5001
2023-02-13 15:32:11

@Virgo I can access the client at 192.168.100.41:5001 from any PC on the LAN. I can also access https://192.168.100.41 via VPN tunnel and get to the website. Just port 5001 does not work which I need for admin access to the NAS. The endpoint for my VPN tunnel is on LAN at 192.168.100.128. Port triggering and virtual servers only allow me to select WAN as the interface.

  0  
  0  
#3
Options
Re:ER605 VPN cannot access LAN port 5001
2023-02-14 07:02:54

  @Bistromatic 

 

What if you set the VPN IP Pool as same as LAN IP pool？

You can change the VPN IP pool to 192.168.100.X and test it.

Just striving to develop myself while helping others.
  0  
  0  
#4
Options
Re:ER605 VPN cannot access LAN port 5001
2023-02-15 00:59:33

@Virgo thank you for your help!

 

I contacted tech support directly and they said they tested it and it works for them.

 

I just return the router and go with an EdgeRouter again. I just installed it today and it works flawlessly.

 

Thanks again!

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 605

Replies: 4

Related Articles
ER605 V1 VPN cannot access network
503 0
ER605 port forwarding for remote access on pc
2550 0
LAN to LAN VPN - TPLINK ER605
2448 0
ER605 as VPN Client to share remote internet on LAN
2935 1
VPN lan to lan not ping
1714 0
LAN to LAN VPN Issue
38 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.