LAN to LAN VPN Issue
I have setup LAN-TO-LAN VPN. On the responder side there is one LAN and the ER605 with a LAN address of 192.168.1.155. I can map remotely to all servers that use the .155 gateway. However, there is another brand router on the same LAN & subnet that uses a LAN address of 192.168.1.254 that I can't map to. How can I ping and map to the .254 servers accessing remotely through the VPN using the .155 address?
Thanks in advance for your suggestions!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for posting in our business forum.
Bill_San_Carlos wrote
I have setup LAN-TO-LAN VPN. On the responder side there is one LAN and the ER605 with a LAN address of 192.168.1.155. I can map remotely to all servers that use the .155 gateway. However, there is another brand router on the same LAN & subnet that uses a LAN address of 192.168.1.254 that I can't map to. How can I ping and map to the .254 servers accessing remotely through the VPN using the .155 address?
Thanks in advance for your suggestions!
Same subnets on a remote router?
You should read the guides on S2S VPN config and change that subnet.
How to set up Site-to-Site Manual IPsec VPN Tunnels on Omada Gateway via Omada Controller
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
Bill_San_Carlos wrote
I have setup LAN-TO-LAN VPN. On the responder side there is one LAN and the ER605 with a LAN address of 192.168.1.155. I can map remotely to all servers that use the .155 gateway. However, there is another brand router on the same LAN & subnet that uses a LAN address of 192.168.1.254 that I can't map to. How can I ping and map to the .254 servers accessing remotely through the VPN using the .155 address?
Thanks in advance for your suggestions!
Same subnets on a remote router?
You should read the guides on S2S VPN config and change that subnet.
How to set up Site-to-Site Manual IPsec VPN Tunnels on Omada Gateway via Omada Controller
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 25
Replies: 1
Voters 0
No one has voted for it yet.