Business Community > All Threads > VPN very slow in relation to the speed of the links used (Client to LAN)
< All Threads

VPN very slow in relation to the speed of the links used (Client to LAN)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN very slow in relation to the speed of the links used (Client to LAN)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN very slow in relation to the speed of the links used (Client to LAN)
VPN very slow in relation to the speed of the links used (Client to LAN)
2023-02-21 14:03:04 - last edited 2023-02-21 19:57:14
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version:

In the ER605 with conventional links it gave an average of 1.60 to 1.70 Mb/s for both UP and DOWN. In another test with a dedicated link, which is much more expensive and is a real link with an average of 4.00Mbps UP and 3.50Mbps DOWN. Even the client and lan speeds are 450Mbps Down and 100Mbps UP, why is it so slow? and I'm making only 1 connection. Even through OpenVPN or L2TP they are very slow. Is there anything I can do to improve this?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:VPN very slow in relation to the speed of the links used (Client to LAN)-Solution
2023-02-21 18:34:12 - last edited 2023-02-21 19:57:14

  @Bug_do_Ti 

 

If you bought the ER605V2, then upgrade to the latest firmware and use Wireguard as your VPN.  You are still ultimately going to be limited to capability of the embedded processor in the ER605, but you'll get better throughput because it is a less compute-intensive VPN solution.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:VPN very slow in relation to the speed of the links used (Client to LAN)-Solution
2023-02-21 18:34:12 - last edited 2023-02-21 19:57:14

  @Bug_do_Ti 

 

If you bought the ER605V2, then upgrade to the latest firmware and use Wireguard as your VPN.  You are still ultimately going to be limited to capability of the embedded processor in the ER605, but you'll get better throughput because it is a less compute-intensive VPN solution.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options
Re:VPN very slow in relation to the speed of the links used (Client to LAN)
2023-02-21 20:04:34

  @d0ugmac1 Thanks for the answer, but my version is V1.0Thanks for the answer, but my version is V1.0 crying

  0  
  0  
#3
Options
Re:VPN very slow in relation to the speed of the links used (Client to LAN)
2023-02-21 21:05:55

  @Bug_do_Ti 

 

I feel your pain!  Look if you want a little speed boost and don't need the encryption, just run a straight L2TP tunnel (drop the IPsec) as doing that should improve things a bit.

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 1287

Replies: 3

Related Articles
Slow SMB transfer speed
434 0
Slow Internet Speed On ER605 V2
1380 0
Very slow VPN speed
4666 0
ER605 V2 VPN Client-to-Site with OpenVPN Extremely Slow
193 0
Extremly slow Vpn throughput on ER605
2712 0
ER605 L2TP VPN is very slow, any advice?
2042 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.