EAP225 v5 only showing Busy and Free while EAP225 v4 shows RX / TX Frames, Interference & Free
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
@Hank21 & @Fae can you help with the following? Can you explain why EAP225 v5 1.1.1 Build 20220908 Rel. 31725 only displays the following info.
Whereas EAP225 v4 5.1.0 Build 20220926 Rel. 62456 displays the following:
I am currently using OC200 Controller v 5.7.6 - 2.7.7 Build 20221206 Rel.58608. I had hoped the first firmware release for the v5 would align the too HW versions.
Can you advise please? Many thanks.
Dear @Apples ，
Thank you so much for taking the time to report the issue to our community!
Due to chip differences, the channel utilization on EAP225 v5 cannot distinguish Tx/Rx frame, so Tx/Rx and Interference are uniformly represented by Busy.
Therefore, the Controller only shows Busy and Free for EAP225 v5.
To check Rx or Tx package, please navigate to Details->Radios to find the detailed information as below:
Dear @Apples ，
Thank you so much for taking the time to report the issue to our community!
Due to chip differences, the channel utilization on EAP225 v5 cannot distinguish Tx/Rx frame, so Tx/Rx and Interference are uniformly represented by Busy.
Therefore, the Controller only shows Busy and Free for EAP225 v5.
To check Rx or Tx package, please navigate to Details->Radios to find the detailed information as below: