Home

Forums

Stories

Knowledge Base

Business Community > All Threads > Is this the proper way for remote management in ER7206 V1 standalone

< All Threads

Is this the proper way for remote management in ER7206 V1 standalone

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Is this the proper way for remote management in ER7206 V1 standalone

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

YuukiA

2023-03-14 03:50:05 - last edited 2023-03-15 05:17:05

Posts: 86

Helpful: 34

Solutions: 2

Stories: 0

Registered: 2022-12-13

Is this the proper way for remote management in ER7206 V1 standalone

2023-03-14 03:50:05 - last edited 2023-03-15 05:17:05

Model: ER7206 (TL-ER7206)

Hardware Version: V1

Firmware Version: 1.2.3 Build 20221104 Rel.41500

ER7206 V1 on `192.168.20.0/24` with IP address `192.168.20.1`

Remote management by a PC at the same subnet with IP address of `192.168.20.240/32`

Is this correct? If not, I will probably be locked out.

Screenshot

I found extra resource on this topic Configure remote management on SMB router . Not sure how helpful. I don't think this Remote Management is here to secure the page from Local traffic.

1 Accepted Solution

Hank21

2023-03-15 05:11:47 - last edited 2023-03-15 05:17:05

Posts: 3673

Helpful: 718

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:Is this the proper way for remote management in ER7206 V1 standalone-Solution

2023-03-15 05:11:47 - last edited 2023-03-15 05:17:05

Hi @YuukiA

Remote Management is used to manage your router from WAN side. It's not used to secure the page from local LAN network.

The subnet/mask should be a WAN side IP(in normal case a public IP), so you can login the router via it's WAN IP address.

If you want to login the router from anywhere, you can put in 0.0.0.0/0 as the remote IP, so all IP that can communicate with your router WAN, will be able to open the router login page.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Recommended Solution

2 Reply

Hank21

2023-03-15 05:11:47 - last edited 2023-03-15 05:17:05

Posts: 3673

Helpful: 718

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:Is this the proper way for remote management in ER7206 V1 standalone-Solution

2023-03-15 05:11:47 - last edited 2023-03-15 05:17:05

Hi @YuukiA

Remote Management is used to manage your router from WAN side. It's not used to secure the page from local LAN network.

The subnet/mask should be a WAN side IP(in normal case a public IP), so you can login the router via it's WAN IP address.

If you want to login the router from anywhere, you can put in 0.0.0.0/0 as the remote IP, so all IP that can communicate with your router WAN, will be able to open the router login page.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Information

Helpful: 0

Replies: 2

Is this the proper way for remote management in ER7206 V1 standalone

Is this the proper way for remote management in ER7206 V1 standalone

Information

Voters 0

Tags