Business Community > All Threads > How to reset TL-SG2210P v5 for re-adoption by Omada Controller
< All Threads

How to reset TL-SG2210P v5 for re-adoption by Omada Controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to reset TL-SG2210P v5 for re-adoption by Omada Controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to reset TL-SG2210P v5 for re-adoption by Omada Controller
How to reset TL-SG2210P v5 for re-adoption by Omada Controller
2023-04-24 17:02:18 - last edited 2023-04-26 00:55:46
Model: SG2210P  
Hardware Version: V5
Firmware Version: 5.0.3 Build 20221019 Rel.46702

My switch lost connection to the Omada Controller, so I used the reset button to factory reset it.  Now when I access it via the factory default IP (https://192.168.0.1) the page says that the switch is managed by an Omada Controller and I need to forget it or reset it.  I have reset it, and I have forgotten it!

 

What do I do to properly reset it so that I can re-adopt it?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:How to reset TL-SG2210P v5 for re-adoption by Omada Controller-Solution
2023-04-25 15:52:36 - last edited 2023-04-26 00:55:46

  @Virgo it was already gone.

 

I noticed that after resetting, the switch picked up a different address by DHCP which was not showing the error message and I was able to add it. However it was also accessible via the default address 192.168.0.1, where it had the warning message. Very confusing, but I have resolved the issue now.

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:How to reset TL-SG2210P v5 for re-adoption by Omada Controller
2023-04-25 08:31:34

  @dunxd 

 

Hi, can you login your controller?

Go to Device list---find the switch-----click it and click config on the details window, click Forget.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:How to reset TL-SG2210P v5 for re-adoption by Omada Controller-Solution
2023-04-25 15:52:36 - last edited 2023-04-26 00:55:46

  @Virgo it was already gone.

 

I noticed that after resetting, the switch picked up a different address by DHCP which was not showing the error message and I was able to add it. However it was also accessible via the default address 192.168.0.1, where it had the warning message. Very confusing, but I have resolved the issue now.

Recommended Solution
  0  
  0  
#3
Options
Re:How to reset TL-SG2210P v5 for re-adoption by Omada Controller
2023-04-30 18:27:27

I was subsequently informed by TP-Link support that the ER605 also uses 192.168.0.1 as a default address. It appears that I was reaching this instead of the switch address due to the conflict and being connected more closely to the router which responded first.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 2479

Replies: 3

Related Articles
Help with the adaption of TL-SG2210P
2864 0
is TL-SG2210P POE+ compliant?
458 0
TL-SG3428 Issue with Adoption and Reset
433 0
Trunk port on TL-SG2210P and TL-SG3424
1004 0
Omada app cant find TL-SG2210P on local network for adoption
339 0
Omad
901 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.