Hello,

we have yesterday replaced and expand our network with a view new network hardware. Replaced the Router ER7206 with ER8411 here I had hoped that the switch from one to other router with the Omada controller runs better, but that's another topic. My issue again regardign the ACL possibilities, this is just not satisfactory. We have already some time ago reported an issue with the switch acl rules that after a firmware upgrade there is a limitation in handling of switch acl rules. This means we can not use anymore the switch acl rules regarding because of an artificial limitation or whatever. Then we have moved to gateway ACL rules. That has worked to dissalow the communication between the different networks. But that does not work now either, first of all the creation of gateway acl rule has been changed I think? No bidirectional option more and when I create both directions manual I can ping from one network to the other. I need ASAP a solution for this issue because now our network security is massively compromised now.

Can you please hel and give me a feedback is there any change from your side in this case and why and how I can handle this

Setup:

1x OC300 Controller Fimrware 5.9.32

1x ER8411

1x TL-SG3428 v2.0

1x TL-SX3008F v1.0

2x TL-SX3016F v1.0

Thanks in advanced