Hi,

I recently set up a pair of CPE710s for internet access but am having difficulty and have almost tapped my technical skills.

I have fiber hooked up to a barn bear the road. The ONT modem is plugged into a CPE710 in AP mode. This is then locked to a CPE710 in client mode at my house approximately 200 meters away. The client CPE connects to a router which should provide the home internet.

ONT---CPE710(AP) >>><<<CPE710(Client)----Orbi Router

I am able to Access the client CPE via the home network. The CPEs are connected and have a strong signal. However I cannot manage the AP from my home network. Additionally there is no internet access on my house side.

I am fairly certain that I have messed something up with the IP settings or subnet but am not sure what is required to get this working.

AP CPE is set to DHCP mode. Client is static. The idea was that the AP would get its IP from the ISP and the router would connect to the static Client but this doesn't feel right. Especially when I'm connecting to the Client CPE via the router WAN port.

Additional information:

Router IPs: 192.168.1.x

ISP is ziply fiber and should work with DHCP and no login.

Thank you in advance for any help!