Business Community > All Threads > DDNS update from wrong WAN
< All Threads

DDNS update from wrong WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DDNS update from wrong WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DDNS update from wrong WAN
DDNS update from wrong WAN
2023-06-12 02:54:33
Tags: #WAN Setup #DDNS
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.3.0

Using the OMADA SDN

Have DDNS set up to update using my backup/second WAN connection.

IP address being updated to DDNS is from the primary WAN connection, not the WAN connection the DDNS is set up to use.

  0      
 
  0      
 
#1
Options
4 Reply
Re:DDNS update from wrong WAN
2023-06-13 09:18:54

Hi @DRomney,

 

Did you set Link Backup either? What is the version of your controller?

Could you confirm whether the Backup WAN is online when the DDNS server is updated?

If you can provide more details about your settings and network layout, it will be more helpful.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:DDNS update from wrong WAN
2023-06-13 12:47:53 - last edited 2023-06-13 12:52:00

  @Hank21 

Yes, Link backup has been set up.
Controller is OC200 running firmware 1.24.0 Build 20230328 Rel.52384.
Backup links is online.

I have the Dynamic DNS service set up specifically to that Connection.

And this is how my link setup/load balancing is set up.

Load Balancing Weight = 10:1

Optimized routing enabled
Link Backup: Enabled
Primary WAN: WAN

Backup WAN: WAN/LAN1
Backup Mode: Link Backup Enabled
Mode: Enable backup link when any primary WAN fails

  0  
  0  
#3
Options
Re:DDNS update from wrong WAN
2023-06-15 02:34:41

Hello @DRomney，

 

It is strange, it should be only one WAN online as always once you enable the Link Backup feature.

Could you set the Online Detection for them?

 

You may go to Device List, click on the ER605 and it will pop up a Details window, go to Config----Advanced, set the Echo server to check the live WAN connection.

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:DDNS update from wrong WAN
2023-06-23 04:58:50 - last edited 2023-06-23 04:59:16

  @Hank21 

Once I set the echo server to my backup connection my Network lost internet access. (At least it seemed that way)

Once I put everything back I regained internet access.

I can access stuff on My Network using my backup connection, so i know it is working and active. The problem is the DDNS is sending the IP of the main connection, not the backup/secondary connection.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 512

Replies: 4

Tags

WAN Setup
DDNS
Related Articles
Extra WAN port?
245 0
ER605 reports Local IP to DDNS instead of WAN IP
729 0
Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN
411 0
DDNS von Strato
503 0
Connection to WAN rejected instead of dropped.
664 0
ER605 wrong WAN IP Address?
872 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.