Business Community > All Threads > SFP+PPPoE: manual disconnect does not stop redialing
< All Threads

SFP+PPPoE: manual disconnect does not stop redialing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SFP+PPPoE: manual disconnect does not stop redialing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SFP+PPPoE: manual disconnect does not stop redialing
SFP+PPPoE: manual disconnect does not stop redialing
2023-06-29 16:02:53
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: latest beta

Yet more issues with PPPoE, only verified it ocurrs with the SFP WAN, butr probably does anywhere.

 

If I click "disconnect" the pppoe connection goes down only to be re-estabilished again after the redial interval.this is wrong.

manually triggered "disconnect" event should not be treated the same as "automatic" disconnect. If I press disconnect, pppoe should remain disconnected either until I manually press "connect" or the device is rebooted.

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:SFP+PPPoE: manual disconnect does not stop redialing
2023-06-30 07:34:46

  @crrodriguez 

not sure what you mean. are you saying it auto reconnects to the isp server? sending the packet to isp server even if you have clicked the disconnect button?

have you wireshark this to verify this?

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#2
Options
Re:SFP+PPPoE: manual disconnect does not stop redialing
2023-06-30 13:41:31

  @Tedd404 I press disconnect..and after a while it reconnects to the isp by itself. this is of course the behaviour you want only when the disconnect is automatic and not when it is manual.. manual stop means stop and do not start again unless I tell you so.

  0  
  0  
#3
Options
Re:SFP+PPPoE: manual disconnect does not stop redialing
2023-07-03 01:09:58

  @crrodriguez 

i know this. but just curious about it if it is sending that packets to the isp. you capture that packet, and that nails it. 

you now can contact the team about the problem. it needs a fix. 

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#4
Options
Re:SFP+PPPoE: manual disconnect does not stop redialing
2023-07-03 21:24:41

  @Tedd404 packet capture is not needed.. manual stop always means full stop. the connection is not configured to dial up on demand either

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 567

Replies: 4

Related Articles
PPPoE failing SFP WAN. Internet VLAN disabled in advanced option after ER7206(UN)_V1_1.3.0 upgrade
1247 0
How i can manage the SFP module on ER7206
678 0
ER7206 detected WAN Ping attack and dropped 2 packets.
2415 0
gpon and sfp
465 0
PoE standard does not connect (disconnect)
676 0
PPPoE MRU
607 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.