Built-in RADIUS Server authentication failed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Built-in RADIUS Server authentication failed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Built-in RADIUS Server authentication failed
Built-in RADIUS Server authentication failed
2023-07-21 07:35:46
Model: OC300  
Hardware Version: V1
Firmware Version: 5.11.10

Hi everyone ,

I am using 802.1x port based authentication with Omada Built-in RADIUS server.

After enable tunnel reply in server setting the RADIUS client authentication failed.I also Enable VLAN assignment in setting.What should I do ?

 

 

  0      
  0      
#1
Options
13 Reply
Re:Built-in RADIUS Server authentication failed
2023-07-21 10:08:08

  @DarLynn 

 

have switches access to radius server ip port? is switch on same vlan as the controller if not you have to do some firewaling..

  0  
  0  
#2
Options
Re:Built-in RADIUS Server authentication failed
2023-07-23 11:41:16

  @MR.S 

Yes, Switch can access the RADIUS Server IP.When I disabled tunnel reply in server settings RADIUS client connected with the IP address 192.168.0.xxx.I don't want to use like this.I want to use RADIUS server with VLAN assignment so I enable tunnel reply in server settings again the RADIUS client authentication failed.

  0  
  0  
#3
Options
Re:Built-in RADIUS Server authentication failed
2023-07-23 12:14:54

  @DarLynn 

 

Ok, I have not tested switch, but it work on WiFi and vlan even from remote site.

 

 

 

 

  0  
  0  
#4
Options
Re:Built-in RADIUS Server authentication failed
2023-07-23 13:09:30

  @MR.S Yes , It work on WIFI, wireless client can access the internet with RADIUS user account also VLAN work properly . I want to test to you enable  "tunnel reply" in server settings and then select Port Based  authentication type and assign one port for wire client after that client PC plug into this port and login with RADIUS username and password.

MR.S wrote

  @DarLynn 

 

Ok, I have not tested switch, but it work on WiFi and vlan even from remote site.

 

 

 

 

  0  
  0  
#5
Options
Re:Built-in RADIUS Server authentication failed
2023-07-23 13:22:38 - last edited 2023-07-23 13:22:57

  @DarLynn 

 

What switch do you have?

  0  
  0  
#6
Options
Re:Built-in RADIUS Server authentication failed
2023-07-23 13:57:29 - last edited 2023-07-23 14:05:39

  @DarLynn 

 

I do a test and it work on Sg2008 Switch, I was redirected to vlan

 

the biggest problem with this radius server is that if you create a user in one site, the same user can log on to all sites.
if you have a controller with many customers, this becomes a security problem.

 

 

  1  
  1  
#7
Options
Re:Built-in RADIUS Server authentication failed
2023-07-23 16:25:34

  @MR.S I have tested on TL-SG2210P and also TL-SG2428P . 

  0  
  0  
#8
Options
Re:Built-in RADIUS Server authentication failed
2023-07-23 16:28:41

  @MR.S I will show you at tomorrow more detail my configuration with screen capture .Thank for your kindly reply and help.

  0  
  0  
#9
Options
Re:Built-in RADIUS Server authentication failed
2023-07-25 10:23:12 - last edited 2023-07-25 10:25:31

  @MR.S 

Here my configuration , The first step i enable tunnel reply in server settings

The second step I selected on Port 11 as radius client as shown in figure

I create radius user with VLAN 10 and connect this port to PC .The RADIUS authentication is failed .

 

also the switch become HEARTBEAT MISSED.Sorry my bad in English.

  0  
  0  
#10
Options
Re:Built-in RADIUS Server authentication failed
2023-07-25 10:32:13

  @DarLynn 

 

why heartbeat missing? I don't know.

same config as I do, 

but you have to go to switch port and go to profile override and select auto to get it to work

 

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 3379

Replies: 13

Related Articles