TL-R470T+ when used makes my internet slow or no internet connection at all
TL-R470T+ when used makes my internet slow or no internet connection at all
Hi,
I am using 2 isp - pldt and globe.. . it used to work before but now its sort like having a problem by itself....
version - 6.0.4 Build 20200313 Rel.32850
wan1 - pldt - 600mbps
wan2 - globe - 600mbps
loadbalance - enabled
failover when wan1 is out and will use wan2
wan/lan3 - used to connect to 24pcs unmanaged switch
wan/lan4 - used to connect to 16pcs unmanaged switch
lan5 - connceted to main pc where all admin access is being monitored...
the net goes slow ...... it cant even load the youtube in my admin pc..... i dont know if its the system itself clogged up or so .... dymanic ip is enable for both also ....
but when i make it a direct connection without the load balancer... everything is so fine ..... and even using wifi is so fine.... its just when using this load balancer making internet slow or having no internet at all detected even if the admin dashboard syas the links are up ....
what should i do ?
system log says - its has dhcp service issue problems
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I thought the R470T+ only had 10/100 Ethernet ports ? So you're going to be limited to 100Mb * 2
- Copy Link
- Report Inappropriate Content
@MisterW do you mean i have to upgrade to r480+ ?
well.. it worked before .... maybe you could help on my setup .. i have anydesk....
- Copy Link
- Report Inappropriate Content
@acedilloruss sorry, I don't know enough about your setup to help. I was merely pointing out that the r470t ports appear to have a physical limit of 100Mb which will limit your throughput. I sounds like you've got additional problems though...
- Copy Link
- Report Inappropriate Content
So you're facing Internet failure everytime when you enable load balancer for multi-WANs and when you disable it everything will be fine? Can you attach your load balance settings? Pictures or directly config files will both be fine.
- Copy Link
- Report Inappropriate Content
@Loycelover- yes that is exactly what im tell about ...
Here is the screenshot speedtest when using load balancer - https://www.speedtest.net/result/15298156265
Load balancing - https://prnt.sc/1kXkwcSnqcdT
Link backup - https://prnt.sc/3unuJgoxhhk1
Network wan settings - https://prnt.sc/DvOxUYQtpLMm
IP mac binding - https://prnt.sc/-NVKy9Qfgt70
Very basic settings.....
- Copy Link
- Report Inappropriate Content
Well as I know TL-R470+ V6 uses 100Mbps ports, so it's true that you can only get 100Mbps network speed, you really sure you can get higher speed when removing load balancer?
- Copy Link
- Report Inappropriate Content
like what misterw said, you did not even care to read his post
this is a 100Mbps router. max speed is 100Mbps. get a new model then. omada series.
setup is fine. link backup would not aggregate the speed. backup wan will be offline until the primary is down.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@acedilloruss from that screeshot it looks like both WAN connections are being allocated the same IP 192.168.254.100.
I'm confused by the fact that 192.168.254.100 is NOT a public routable IP address, why are your WAN connections being allocated such an address ?
- Copy Link
- Report Inappropriate Content
i choose dynamic ip for both wan.. so i dont know exactly really..
maybe you guys could control my pc and see all the settings of what is really wrong...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1726
Replies: 17
Voters 0
No one has voted for it yet.