How to connect TL-SG105PE to router on different subnet
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I can't find any useful user manuals for this device. I plugged a PC directly into the switch and got onto it at 192.168.0.1 and then switched off DHCP and changed it's IP address to 192.168.1.200 (as my router is at 192.168.1.1 so set default gateway to this too). I have then connected another lead from port 5 to the router but am unable to ping it or connect to anything else on this network. I want everything to be able to talk to everything and therefore need them all on 192.168.1.x. When i plug in an IP Camera to another port of the switch I want ti to pick up an IP address from routers DHCP or let me set a fixed IP on this subnet so that it can then send streams to my NAS surveillance station. Please advise what step I have missed and or refer me to some useful literature. I have installed easy-smart-switch utility on a different PC on the 192.168.1.x network and it can't find any switch.
