Business Community > All Threads > Omada setup with 3rd party switch and vlans
< All Threads

Omada setup with 3rd party switch and vlans

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada setup with 3rd party switch and vlans

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada setup with 3rd party switch and vlans
Omada setup with 3rd party switch and vlans
2023-10-19 16:52:36 - last edited 2023-11-23 09:16:42
Model: EAP225  
Hardware Version: V3
Firmware Version: 5.1.0

what I would like:

 

management / eaps to be on vlan 10

pfsense box (running dhcp etc)>3rd party L2 managed switch>2 EAPs on Omada   SSD guest vlan 20, SSD home vlan 30

 

I had this working a few years ago on an older version of Omada and a Netgear gs108t but having difficulties with current version of Omada...

 

I've got vlans setup in Wired Networks>LAN and tied to the EAP, EAP connected to trunk port on switch but not able to get client IP

 

Is there a guide somewhere?  Something I need to do with LAN config?  I am unable to make changes in the Profile tab - only option at the bottom is Back.

 

Was not connected to correct port on switch angry

 

However, I am still a bit confused as to how the LAN configuration needs to be setup in this application.

 

Right now I've got the LAN pointing to gateway on managment vlan

 

 

Thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Omada setup with 3rd party switch and vlans-Solution
2023-10-20 19:53:29 - last edited 2023-11-23 09:16:42

  @sadpanda 

 

If you have a 3rd party switch and you are setting up EAPs under Omada Controller, forget about the wired network settings in the controller. They do not apply to your switch. You only need to configure the EAPs and the wireless network in the controller.

Kris K
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Omada setup with 3rd party switch and vlans
2023-10-20 05:33:59

  @sadpanda Here's the User Guide of Omada Cotroller: https://static.tp-link.com/upload/manual/2023/202306/20230609/1910013343_Omada%20SDN%20Controller_User%20Guide_REV5.9.0.pdf

To be honest, I didn't get you. Can you describe it more specifically?

  0  
  0  
#2
Options
Re:Omada setup with 3rd party switch and vlans
2023-10-20 11:28:37

  @sadpanda I'm not using tplink switch/router, just the EAPs

 

In this application, what is the correct way to setup Settings>Wired Networks>LAN?  Is it even used/necessary?  It cannot be deleted thats why I'm asking.

  0  
  0  
#3
Options
Re:Omada setup with 3rd party switch and vlans-Solution
2023-10-20 19:53:29 - last edited 2023-11-23 09:16:42

  @sadpanda 

 

If you have a 3rd party switch and you are setting up EAPs under Omada Controller, forget about the wired network settings in the controller. They do not apply to your switch. You only need to configure the EAPs and the wireless network in the controller.

Kris K
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1174

Replies: 3

Related Articles
Omada as Hotspot gateway with 3rd party APs
1380 0
How do I access 3rd party router on the Omada network that's currently setup? ArcherAX72Pro
955 0
OMADA set up VLAN on switch, 3rd party router
572 0
Er707-m2 vlan trunking to 3rd party FS switch
121 0
Setting Up VLANS in Omada setup.
847 0
Non Omada Switch cycling VLANs
435 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.