Incorporating Omada SDN with existing 10G Hardwares
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi everyone,
I'm planning to incorporate Omada SDN ecosystem into a pre-existing config for a video editing company I'm working under at the moment. I have done some research and come up with a simple network topology that I hope would work. I would appreciate it if you would take a look at what I come up with and see if there's anything I miss or could do better.
I'm just not familiar with Omada SDN and afraid that I'd make the wrong purchase. 😔
Thank you for your time. 🙏🙏
My Network Requirement :
- Facilitate 10G speed for server and editing suite
- 3 VLANs for editing suite, staffs, and guests
- Can facilitate up to 200-ish devices.
Hello @deo2888,
Based on your requirements and descriptions, the 10G speed will be limited to 1G in your network because the ER7206 and TL-SG2210MP both only support 1 Gigabit ports.
Here is the specifications of ER8411 with 2 10G SFP ports: https://www.tp-link.com/en/business-networking/omada-sdn-router/er8411/v1/#specifications
And the 10G switches you may refer to here.
Hello @deo2888,
Based on your requirements and descriptions, the 10G speed will be limited to 1G in your network because the ER7206 and TL-SG2210MP both only support 1 Gigabit ports.
Here is the specifications of ER8411 with 2 10G SFP ports: https://www.tp-link.com/en/business-networking/omada-sdn-router/er8411/v1/#specifications
And the 10G switches you may refer to here.