Business Community > All Threads > VIGI NVR4032H Port Aggregation Issue
< All Threads

VIGI NVR4032H Port Aggregation Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VIGI NVR4032H Port Aggregation Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VIGI NVR4032H Port Aggregation Issue
VIGI NVR4032H Port Aggregation Issue
2023-12-22 16:42:48 - last edited 2024-09-19 07:23:43
Model: VIGI NVR4032H   TL-SG2428P  
Hardware Version: V1
Firmware Version: VIGI NVR4032H(UN)_V1_1.0.1 Build 230628

Hi Support Team,

 

I recently implemented the VIGI NVR4032H on one of my client locations, and while configuring the port aggregation, encountered an issue, where after enabling the port aggregation on the switch (TL-SG2428P V1) there is a huge latency coming up while accessing the switch web UI. 

 

If I disconnect one of the ports, then the switch latency comes down <2 ms, and with port aggregation, the latency is more than 500+ ms. I tried both the STATIC LAG and LACP mode on the switch, but it's not making any difference.

 

Am I doing any wrong configuration here? 

 

Note: I selected the VIGI NVR1016H model, as NVR4032H was not coming under the model.

 

Hardware

 

1. TL-SG2428P V1

2. ER605 v2

3. VIGI NVR4032H

 

Regards,

Sk Shabbir

  0      
 
  0      
 
#1
Options
4 Reply
Re:VIGI NVR4032H Port Aggregation Issue
2023-12-25 02:51:21 - last edited 2024-09-19 07:23:19

Hi @SkTech 

Thanks for posting in our business forum.

There is no LAG in the VIGI series. Are you reading it correctly? I think you misconfigured the product and made a loop.

If it is a loop, fix the loop. Omada router does not support LAG either.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:VIGI NVR4032H Port Aggregation Issue
2023-12-25 08:55:52 - last edited 2024-09-19 07:23:19

  @Clive_A 

 

In the VIGI Network setting page, I selected the Port aggregation on the network and selected the switch as Static LAG. I didn't connect to the Omada router but from the switch itself.

 

Question to you, if there is no aggregation support, then why are two ports present in the VIGI NVR, in the Network setting, there are three below options:-

 

1. Port Aggregation

2. Failover

3. Individual Network setting

 

In the past, I configured the third-party NVR to the Omada switches, using the STATIC LAG, and never encountered any issues.

 

Regards.

Sk Shabbir

  0  
  0  
#3
Options
Re:VIGI NVR4032H Port Aggregation Issue
2023-12-27 05:31:21 - last edited 2024-09-19 07:23:19

Hi @SkTech 

Thanks for posting in our business forum.

SkTech wrote

  @Clive_A 

 

In the VIGI Network setting page, I selected the Port aggregation on the network and selected the switch as Static LAG. I didn't connect to the Omada router but from the switch itself.

 

Question to you, if there is no aggregation support, then why are two ports present in the VIGI NVR, in the Network setting, there are three below options:-

 

1. Port Aggregation

2. Failover

3. Individual Network setting

 

In the past, I configured the third-party NVR to the Omada switches, using the STATIC LAG, and never encountered any issues.

 

Regards.

Sk Shabbir

I checked this mode in the lab and it supports the LAG. But it seems the model we have in the lab is broken. If you are in a hurry to get this resolved, please contact us by email with details.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:VIGI NVR4032H Port Aggregation Issue
2024-02-20 16:34:17 - last edited 2024-09-19 07:23:19

  @Clive_A 

 

Is there any progress on testing the Port Aggregation for VIGI NVR4032H 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 668

Replies: 4

Related Articles
VIGI NVR4032H V1 - SATA interface
258 0
VIGI NVR4032H (V1) Face Detection w/ Non-Face Capture VIGI Camera
835 1
VIGI NVR - Network/cloud backup of recording.
394 0
Vigi NVR cant be added on Vigi app when NVR is connected to VMS Cloud
192 0
How to Configure the Transmission of the Vigi NVR1016H and the Vigi C 340-W Cameras.
363 0
Vigi C540 mounting plate drawing
369 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.