Vigi NVR1008H Smart detection not working
Hello,
I have a setting with 3 Vigi V C540 connected on the lan connector from 3 diffrent eap 225 ourtdoor. I was running it with a SD card. All was running fine smart detection was working. But my customer wants a 24h survailence + detection of person and cars. This is not really possible with a SD card to less storage. So I take the Vigi NVR 1008H with 4TB, connected all cameras to the NVR.
Now I have problems with smart detection on the NVR. The Basic detection on the NVR is working but with basic I have a lot of problems during rain or snow --> smart detection
But smart detection on the NVR is detecting nothing. The smart detection on the cam with the SD card is working.
The NVR has higher sensitiv values for cars and human but no detection.
Arming Schedule is 24h active.
I cant find the problem why the NVR smart detect is not working. Some stream setting problems???
Maybe someone has informations for me.
Kind Regards
Enrico
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Enno I wrote a topic in relation to this issue and I am currently still wating a response. It seems that the VIGI APP is setting the smart events on the camera itself and not the NVR. If you set the smart events on the VIGI APP and not the NVR you wont get any notications or alerts, if you set the smart events using the NVR then all will work as it should.
Clear off the smart events using the VIGI APP and reset them again on the NVR to avoid duplication.
- Copy Link
- Report Inappropriate Content
Hi @Enno
Thanks for posting in our business forum.
Config on your NVR. Gotta check if you have followed the User Guide configured properly.
- Copy Link
- Report Inappropriate Content
I tested with other stream settings. Since I changed from VBR to CBR with bitrate 3072 it working goodand stable ! Maybe the varius stream ( VBR) forced problems with smart detection??
Regards
Enno
- Copy Link
- Report Inappropriate Content
@Enno I wrote a topic in relation to this issue and I am currently still wating a response. It seems that the VIGI APP is setting the smart events on the camera itself and not the NVR. If you set the smart events on the VIGI APP and not the NVR you wont get any notications or alerts, if you set the smart events using the NVR then all will work as it should.
Clear off the smart events using the VIGI APP and reset them again on the NVR to avoid duplication.
- Copy Link
- Report Inappropriate Content
@iTrim Thanks for sharing your infos.
You are right it working like your advise. But this is confuse. When I set it up in the App under NVR it is not working but when I set it up on my workstation about IP access its working... Maybe the next update will fix this.
@iTrim Do you have a answer for my second question? I cant get an playback over IP connection. I have not a live modus just a preview. Or is this just possible when I work directly with the NVR with mous and monitor?
- Copy Link
- Report Inappropriate Content
New update for VIGI NVR1004H-4P Update Logs2023-12-27
New features and enhancements:
1.Added support for playback on the NVR web. << This is what you are looking for?
2.Added support for more smart event detections.
3.Added support for more configurations for the VIGI IPCs.
4.Added support for IP restriction feature for devices accessing the NVR.
5.Added support for email alerts when event detection triggered.
6.Added support for SRTP when used with the VIGI Camera.
7.Optimized third-party camera compatibility.
8.Enhanced device security.
9.Added support for limiting the maximum retention time of recordings.
10.Added support for one-click disarming.
11.Optimized NVR Web UI.
12.Added password protection for recording on disks.
Bug fixed:
Fixed some minor bugs.
Note:
1.Only single-channel playback is supported at a time on NVR web.
Bug fixed:
Fixed some minor bugs. (what are these bugs?)
- Copy Link
- Report Inappropriate Content
This is what Im looking for!! Where do you find this firmware?
The last firmware on the website is this on the picture.
Is there a special developer site where I can find this?
And in my case I need it for the 1008h
- Copy Link
- Report Inappropriate Content
I currently have two NVR's running - at two different locations.
One is the NVR1004H-4P and the other is the same as you 1008h
The update seems to only be for NVR1004H-4P, maybe the 1008h nvr hopefully soon.
I do not see any disarm button on the VIGI APP yet and you have to disarm using the NVR via EVENT > Disarming
There is a new smart frame setting that can be applied to NVR or IPC that seems to be picking up large objects once it's turned on
Video encoding H.265+ and H.264+ now available
The Font for the OSD has also changed for the better more modern feel
*New Smart Event Detection
Loitering Detection
Abnormal Sound Detection
Smart Frame
- Copy Link
- Report Inappropriate Content
that Sounds interesting. So we looking forward to get this feature with the next update on the 1008h.
thanks for your Infos!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1006
Replies: 8
Voters 0
No one has voted for it yet.