Device in VLANs can see configuration panel

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Device in VLANs can see configuration panel

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Device in VLANs can see configuration panel
Device in VLANs can see configuration panel
2024-01-13 15:02:26 - last edited 2024-01-15 09:03:54
Model: ER706W  
Hardware Version: V2
Firmware Version: 1.0.2 Build 20231020 Rel.57490(4555)

Hello,
I have configured two vlans with id 1 and 2 on the er706w router. Computers are connected to vlan1, vlan2 is WiFi. I added a rule that blocks communication between VLAN networks and Wifi devices do not see devices from the wired network and vice versa - that was the goal. The problem is that now WiFi and wired devices provide the address of their gateway (10.0.10.1 and 10.0.20.1) in the browser and the configuration panel is displayed. I would like to block the ability to enter the configuration for devices in vlan2, the question is how to do it?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Device in VLANs can see configuration panel-Solution
2024-01-15 01:47:16 - last edited 2024-01-15 09:03:54

 Hi @damianstelmach 

ACL > GW ACL > SRC are your two VLANs, Block, DST = gateway management page.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Device in VLANs can see configuration panel-Solution
2024-01-15 01:47:16 - last edited 2024-01-15 09:03:54

 Hi @damianstelmach 

ACL > GW ACL > SRC are your two VLANs, Block, DST = gateway management page.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:Device in VLANs can see configuration panel
2024-01-15 09:03:43

  @Clive_A Thanks, it works!

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 383

Replies: 2

Related Articles