Port forwarding to WAN IP alias

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Port forwarding to WAN IP alias

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Port forwarding to WAN IP alias
Port forwarding to WAN IP alias
2024-01-29 13:39:12
Model: OC200  
Hardware Version: V1
Firmware Version: 5.12.9

I've an /29 IP subnet provided by our ISP. I've tried to configure port forwarding for specific port xx using a specific WAN IP alias, it works, I'm able to connect from external to the specified port just on the specified WAN IP alias. But If I want to specify the same specific port xx using a different WAN IP alias, I'm not able to save the config, as the system mentioned that the port is already in use by the interface. Is the router (ER605) or the omanda controller not flexible enough to handle such situation ?

 

I'don't want to use 1 to 1 NAT in such case, as I would not be able to forward different ports of specific WAN IP alias to different servers in the private range

  0      
  0      
#1
Options
1 Reply
Re:Port forwarding to WAN IP alias
2024-01-30 11:29:33

  @odix67 

 

Yes, ER605 can't do this, but I have an ER8411 and the new firmware 1.2.0 has supported and adapted with v5.13. 

Just striving to develop myself while helping others.
  0  
  0  
#2
Options