Port Forwarding Restricted by WAN IP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Port Forwarding Restricted by WAN IP
Region : UnitedStates
Model : TL-R600VPN
Hardware Version : V2
Firmware Version : 1.2.3 Build 140801 Rel.49374n
ISP : AT&T
I would like to enable port forwarding of several ports to one internal host, but ONLY if the request initiates from a few particular IP addresses.
For example I would like Port 23 to FWD to internal host 10.20.1.9, but ONLY if it came from public IP 207.254.223.193 or from public IP 77.21.21.4. All other IPs should see that port as either closed or ghosted.
Is this possible?
Model : TL-R600VPN
Hardware Version : V2
Firmware Version : 1.2.3 Build 140801 Rel.49374n
ISP : AT&T
I would like to enable port forwarding of several ports to one internal host, but ONLY if the request initiates from a few particular IP addresses.
For example I would like Port 23 to FWD to internal host 10.20.1.9, but ONLY if it came from public IP 207.254.223.193 or from public IP 77.21.21.4. All other IPs should see that port as either closed or ghosted.
Is this possible?