Problem ping switch TL-SG2210P
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have a small problem with this switch Tp-Link model TL-SG2210P, when I am connected via an internal Wi-Fi network or via VPN, I can't access the web interface or get ping.
The problem is only with it, as I have no problems with all the other components and my network infrastructure is made up of various VLANs.
I also noticed that I can manage it via GUI and have ping only if I connect to a wired RJ45 port.
How can I solve this problem?
Thanks everyone for the help.
My network:
Router Provider ISP ---> Tp_Link ER605 ---> Swith TP-Link TL-SG2210P ---> TP-Link EAP225
Hello and thanks for the reply.
I had already solved the problem in the evening.
In practice (I mainly use Unifi hardware), and in these Layer 3 switches, you need to create the internal routes because if you don't do them you can only manage them from the native Vlan.
And then having the same problem on the management VPN, all I did was modify the IP pool of the Native Lan by reducing it and then giving the same IP class to the VPN.
Thanks so much.
Hello and thanks for the reply.
I had already solved the problem in the evening.
In practice (I mainly use Unifi hardware), and in these Layer 3 switches, you need to create the internal routes because if you don't do them you can only manage them from the native Vlan.
And then having the same problem on the management VPN, all I did was modify the IP pool of the Native Lan by reducing it and then giving the same IP class to the VPN.
Thanks so much.