ER605 x power outage x Acess points
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 x power outage x Acess points
My ER605 router is connected to a TP LINK SG116E switch, and from there, several wireless access points. After a power outage, all devices restarted, but the wireless access points all came back with the same issue: devices would connect to them but had no internet access (exclamation mark on devices). Only the local network was working. On the wired access points, access was working perfectly with internet access. Why?
I set up all the APs with static IP and reserved on DHCP settings on ER605.
Re:ER605 x power outage x Acess points
Hi @Icaro
Thanks for posting in our business forum.
Cannot judge based on the given information.
It still looks like a problem with your network setup.
Try this guide and give some screenshots:
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.