LJG5000 wrote

I have an EAP 610 with an ethernet connection to a BE800 router. I use it to setup/provide guest networks. I noticed this morning, I was unable to connect to one of its non-guest networks. I had a connection, but no Internet. I unplugged the EAP 610, plugged it back in and wven rebooted the router- all to no effect. I eventually  unplugged it, disconnected it from the router to check the MAC Address to see if it was being bliocked on the network- which it wasn't. I plugged the EAP 610 back in, reconnected it to the router and it now works properly. I also updated to the 3/2024 firmware.

I have never seen hardware perform in this way- and I have no explanation on why it failed and is now working. 

Hi @LJG5000 

Do you mean you were still able to connect to that SSID without Internet connection? What about the IP address? Did you still get the IP address?

When we found the WiFi connection issue, we need to identify the issue was related to the EAP itself, the connection between the EAP and router, or the Internet connection. We can test whether we can PING EAP, or PING router to test.

You can share further information if you still suffer the same issue.