tl-sg108 not passing igmp or udp?
I have several of these switches in a few wireless mic racks and I'm having trouble seeing them via the manufacturer's software (Shure). It appears that all the traffic that they use is IGMP multicast and UDP. If I connect them to a "real" switch (cisco), they communicate but through these tp link, they do not. Has anyone else experienced this?
TP Link Switch (from Wireshark):
"No.","Time","Source","Destination","Protocol","Length","Info"
"65","61.904676","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"66","62.001376","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"67","62.108703","10.10.0.98","239.255.254.253","UDP","359","8427 → 8427 Len=317"
Cisco Switch (from Wireshark):
"No.","Time","Source","Destination","Protocol","Length","Info"
"83","25.327861","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"84","25.495135","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"86","25.532541","10.10.0.98","239.255.254.253","UDP","359","8427 → 8427 Len=317"
"87","26.002212","10.10.0.158","239.255.254.253","UDP","349","8427 → 8427 Len=307"
"89","26.369149","10.10.0.98","10.10.0.158","UDP","123","52241 → 57383 Len=81"
"90","26.370591","10.10.0.158","10.10.0.98","UDP","109","57383 → 52241 Len=67"
"91","26.371459","10.10.0.158","10.10.0.98","UDP","129","57383 → 52241 Len=87"
"92","26.371651","10.10.0.98","10.10.0.158","UDP","109","52241 → 57383 Len=67"
"93","26.371726","10.10.0.98","10.10.0.158","UDP","120","52241 → 57383 Len=78"