1
Votes

Reducing the minimum camera dwell time in patrol scanning.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
 
1
Votes

Reducing the minimum camera dwell time in patrol scanning.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Reducing the minimum camera dwell time in patrol scanning.
Reducing the minimum camera dwell time in patrol scanning.
2024-04-21 11:51:48 - last edited 2024-04-22 03:18:06
Model: VIGI C540  
Hardware Version: V2
Firmware Version: 2.0.0 Build 231124 Rel.55573n

Hi,

I propose to reduce the minimum camera dwell time in patrol scanning from 60 seconds to 15 seconds, which will allow for better coverage of the monitored area.

In my opinion, the current dwell time of the camera is too long, which makes the camera not very useful and it can easily miss something important when looking at another place too long.

#1
Options
1 Accepted Solution
Re:Reducing the minimum camera dwell time in patrol scanning.-Solution
2024-04-22 03:17:54 - last edited 2024-04-22 03:18:00

Hi @KamileN7 
Thanks for posting in our business forum.
Unfortunately, we will not change this patrol time on our system.

We set this to 60s due to the consideration of the life span of the product. If setting this parameter low, you device may be retired very soon due to the malfunction in the pivot.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
#2
Options
1 Reply
Re:Reducing the minimum camera dwell time in patrol scanning.-Solution
2024-04-22 03:17:54 - last edited 2024-04-22 03:18:00

Hi @KamileN7 
Thanks for posting in our business forum.
Unfortunately, we will not change this patrol time on our system.

We set this to 60s due to the consideration of the life span of the product. If setting this parameter low, you device may be retired very soon due to the malfunction in the pivot.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
#2
Options

Information

Helpful: 1

Views: 549

Replies: 1

Voters 1

voter's avatar