captive portal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

captive portal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
captive portal
captive portal
2024-04-25 11:08:10 - last edited 2024-04-26 02:10:30
Model: TL-SG3210  
Hardware Version:
Firmware Version:

Hello tech community,i recquest for help on setting up captive portal on lan ports in omada network. i have sg3210 switch and omada controller oc200.

i realised this  because some of my clients are on LAN  while others  connect via wifi access points.and i have other access points that are non tplink but what to use on my omada setup.thanks for help in advance.

  0      
  0      
#1
Options
2 Accepted Solutions
Re:captive portal-Solution
2024-04-28 01:03:04 - last edited 2024-05-08 00:57:54

Hi @Torach 
Thanks for posting in our business forum.

Torach wrote

  @Clive_A ok, though problem not solved.

There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
Re:captive portal-Solution
2024-05-07 13:02:51 - last edited 2024-05-08 00:58:23

  @Clive_A  i finally found away to add non tplink access points to the omada network without hastle.i can also do portal authentification on any Lan ports on the switch.thanks

Clive_A wrote

Hi @Torach 
Thanks for posting in our business forum.

Torach wrote

  @Clive_A ok, though problem not solved.

There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.

 

Recommended Solution
  1  
  1  
#5
Options
7 Reply
Re:captive portal
2024-04-26 01:03:58 - last edited 2024-05-08 00:58:21

Hi @Torach 

Thanks for posting in our business forum.

I recall that the portal requires the router if you choose the portal to be network and if you have EAP, use the SSID, but if you don't have either of them. You cannot set it up with the switch and a controller.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  2  
  2  
#2
Options
Re:captive portal
2024-04-26 06:42:28

  @Clive_A ok, though problem not solved.

  0  
  0  
#3
Options
Re:captive portal-Solution
2024-04-28 01:03:04 - last edited 2024-05-08 00:57:54

Hi @Torach 
Thanks for posting in our business forum.

Torach wrote

  @Clive_A ok, though problem not solved.

There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
Re:captive portal-Solution
2024-05-07 13:02:51 - last edited 2024-05-08 00:58:23

  @Clive_A  i finally found away to add non tplink access points to the omada network without hastle.i can also do portal authentification on any Lan ports on the switch.thanks

Clive_A wrote

Hi @Torach 
Thanks for posting in our business forum.

Torach wrote

  @Clive_A ok, though problem not solved.

There is no switch portal because the switch plays a role in L2. EAP got its SSID portal. Router got its Network portal. Looks like you have neither of them which means you cannot use the portal though you can configure them in the controller web but it is not gonna work.

 

Recommended Solution
  1  
  1  
#5
Options
Re:captive portal
2024-05-07 13:07:08

  @Torach Adding omada system to my network bussiness was really interesting though out of hustle.i have many enginious access points,for now,they are all working well with Omada network.

  0  
  0  
#6
Options
Re:captive portal
2024-05-14 17:18:58

  @Torach Can you share how you've done this please as I have the same issue. Thanks!

  0  
  0  
#7
Options
Re:captive portal
2024-05-16 07:34:32

  @MDG2022 sure,i have done so...

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 874

Replies: 7

Related Articles