Router ER8411 : routing between 2 wan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Router ER8411 : routing between 2 wan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Router ER8411 : routing between 2 wan
Router ER8411 : routing between 2 wan
2024-04-28 11:49:39 - last edited 2024-05-06 10:41:33
Model: ER8411  
Hardware Version:
Firmware Version:

hello,

i have a ER8411 managed from controller oc300

in this configuration i have :

1 WAN (ISP connection internet)

1 LAN

1 MPLS ; this mpls is a wan for routing for secondary site

 

i want route all internet traffic that came from mpls in WAN

 

thanks

 

M.

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Router ER8411 : routing between 2 wan-Solution
2024-04-30 10:18:42 - last edited 2024-05-06 10:41:33

  @Clive_A 

hello! 

i resolve re-configure wan2 as LAN2 and setting a routing

Recommended Solution
  0  
  0  
#13
Options
13 Reply
Re:Router ER8411 : routing between 2 wan
2024-04-29 02:01:46 - last edited 2024-04-29 02:02:13

Hi @MC20 

Thanks for posting in our business forum.

Policy Routing(PBR) should be what you are looking for.

 

Update:

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 07:09:39

  @Clive_A  i want route only internet traffic; lan traffic (network site2 192.168.1.x , site1 192.168.2.x)) no !

do you have a example ? 

  0  
  0  
#3
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 08:56:04

Hi @MC20 

Thanks for posting in our business forum.

MC20 wrote

  @Clive_A  i want route only internet traffic; lan traffic (network site2 192.168.1.x , site1 192.168.2.x)) no !

do you have a example ? 

Don't understand what you mean by route Internet traffic. I don't understand what you are describing and I don't have an answer.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 09:09:07

  @Clive_A 

wan1 is internet (on site1)
wan2 is a mpls (comes from sito2)
from site1 ping site2 ok
from site2 ping site1 ok
from site 2 they don't surf the internet because the routing between wan2 and wan1 is missing
before I had a pfsense and I did it with rules; how do you do it with tplink omada?
I tried this guide
https://community.tp-link.com/en/home/forum/topic/645070
but nothing happens

  0  
  0  
#5
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 09:11:46

Hi @MC20 

MC20 wrote

  @Clive_A 

wan1 is internet (on site1)
wan2 is a mpls (comes from sito2)
from site1 ping site2 ok
from site2 ping site1 ok
from site 2 they don't surf the internet because the routing between wan2 and wan1 is missing
before I had a pfsense and I did it with rules; how do you do it with tplink omada?
I tried this guide
https://community.tp-link.com/en/home/forum/topic/645070
but nothing happens

OK. Making sense now. Static routing.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#6
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 09:17:36
unfortunately it's not enough by doing a static route I get that site2 browses site1, but it doesn't go to the internet
  0  
  0  
#7
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 09:21:57 - last edited 2024-04-29 09:23:11

Hi @MC20 

Thanks for posting in our business forum.

MC20 wrote

unfortunately it's not enough by doing a static route I get that site2 browses site1, but it doesn't go to the internet

Again, I gotta clarify the situation. You want WAN2 to route to WAN1 and they are literally set to be the WAN instead of LAN?

I don't think this should be something a router does to route between your WAN ports. The router is about NAT. Not inter-WAN routing. We don't have such a thing if that's what you described.

 

How instructed you to set this up? Where do you learn from this? Any docs for reference? I don't follow it at all. Does not make sense based on the given information.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#8
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 09:30:34
yes i want sò: all traffic of wan2 (mpls) , routed to wan1 not is possible? script in shell? with tplink support? no?
  0  
  0  
#9
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 09:50:09

Hi @MC20 

Thanks for posting in our business forum.

MC20 wrote

yes i want sò: all traffic of wan2 (mpls) , routed to wan1 not is possible? script in shell? with tplink support? no?

No. There is no such thing unless you can show me a document like that. I thought you were routing the LAN but no.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#10
Options
Re:Router ER8411 : routing between 2 wan
2024-04-29 09:56:27

  @Clive_A 

sorry; in this customer he had pfsense and this is allowed

now i change all infrastructure with omada solution and i got stuck on this...

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1112

Replies: 13

Related Articles