TL-SG1005P-PD - POE++ out (802.3bt) ports not working properly (802.3.af/af is activated only)
Hello,
I have a TL-SG1005P-PD switch, and use it with an Ubiquity PoE++ adapter. This adapter supports the 802.3(bt), but when I activate the switch, the PoEin Status led do not light, which means the switch is powered by only 802.3af/at. What can be the problem?
I connected 2 camera (6W/each) and the switch warn, that there are less than 7W power (PoE MAX led is lighting). I would use it with 4 similar camera, so the power should be totally enough...
Regards, Daniel
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @_Daniel85
Thanks for posting in our business forum.
We recommend you purchase our POE170S for the 802.3 bt power supply adapter to our -PD version switch.
We are not able to guarantee the compatibility of the third-party PoE++ adapter.
- Copy Link
- Report Inappropriate Content
Hi @_Daniel85
Thanks for posting in our business forum.
We recommend you purchase our POE170S for the 802.3 bt power supply adapter to our -PD version switch.
We are not able to guarantee the compatibility of the third-party PoE++ adapter.
- Copy Link
- Report Inappropriate Content
Thank you, probably this is the problem... It would be very useful, if this compatibility issue would be displayed at Tp-Link site: the switch is compatible only with Tp-Link products. As i saw at this forum, many user is concerned and have to buy one more totally new device... :-(
- Copy Link
- Report Inappropriate Content
I'm curious.
When it comes to validating compliance with PoE standards such as 802.3bt, do TP Link self certify this or is it validated by a suitable external body?
I'm seeing a pattern of behaviour when it comes to powering TP Link switches via 3rd party PoE injectors.
There seems to be a similar issue for example with the outdoor switch SG2005P-PD when powered using a non TP-Link PoE injector (that provides 60W of power) results in the unit falling back to minimal power and saying there's only 6W of power left when viewing it via the Omada controller with no PoE consuming devices connected to it.
At the very least TP Link should get their hands on some of these other injectors to understand what the cause of the incompatibility is. Saying "well it works with our injectors, nothing to see here" is exceedingly disingenuous. What next? Only using TP-Link approved patch cords?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 520
Replies: 3
Voters 0
No one has voted for it yet.