This Article Applies to:

 

SG2005P-PD

 

Issue Description/Phenomenon:

 

A few users reported that they use the PoE 802.3 bt adapter to supply power to the SG2005-PD, but it does not get the proper power budget in the Omada Controller GUI.

 

Available Workaround/Solution:

 

We have located the problem that this is because the switch was previously supplied by the 802.3 af/at power.

When it is supplied with 802.3 af/at PoE or PoE+, it will get a PoE budget number. When you switch to an 802.3 bt POE++, the previous PoE budget number will remain.

 

Workaround:

 

To fix this, you can click Foget and readopt the switch. This might clear your settings on the switch.

Or you can click Force Provision. (Recommended)

This will display the correct PoE budget afterward.

 

 

Solution:

 

A new firmware has been released to address this issue. Download of the firmware.

 

Here's the download page: https://www.tp-link.com/en/support/download/sg2005p-pd/#Firmware

 

Thank you for your attention!

 

Update Log:

 

Jul 8th, 2024:

Update the contents.

 

Apr 25th, 2024:

Release of this article.

 

Feedback:

 

If this was helpful, welcome to give us Kudos by clicking the thumbs-up button below.

 

If the solution doesn't work for you, your case is probably different from what is described here.

In that case, please feel free to click Start a New Thread and elaborate on the problem so that we can try to help you further.

 

Thank you for your great cooperation and patience!

TP-Link Support Team