ACL Rule to get access from LAN to VLAN
Hi.
I would like to operate iobroker in my own VLAN.
To manage the system, I need access from the LAN to the VLAN. How should I formulate the ACL rules?
Many Thanks
Thomas
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Kubus0815
For your situation, it's the same as Scenario Ⅵ in the article.
Side note: Please mention me in the subsequent reply, otherwise, I won't be able to get your reply in time.
- Copy Link
- Report Inappropriate Content
HI @Kubus0815
You may refer to the following article:
How to set up Access Control of TP-Link Omada Router in Standalone and Controller
If none of them meet your requirements, please let us know more information especially the topology and the TPLInk devices you are using.
- Copy Link
- Report Inappropriate Content
Hi Vincent,
here is an overview of my topology.
I have the following networks:
- VLAN 1: Admin LAN
- VLAN 10: Guest Wifi
- VLAN 20: IOT VLAN and WiFi for IoBroker here the home automation is to be realized
All Networks have access to the internet.
At Guest Wifi, Guest Network is activated
At IOT Guest Network is not activated, that the clients communicate with each other.
IoBroker runs on a RaspberryPi 4, which should be accessible from the AdminLAN, but not vice versa.
- Copy Link
- Report Inappropriate Content
There is no solution to my problem??
- Copy Link
- Report Inappropriate Content
Hi @Kubus0815
For your situation, it's the same as Scenario Ⅵ in the article.
Side note: Please mention me in the subsequent reply, otherwise, I won't be able to get your reply in time.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 333
Replies: 4
Voters 0
No one has voted for it yet.