bandwith control - not with ipv6
I have 4 vlans en can select them as a network, but even then the rule only apply for the ipv4 trafic and not for ipv6.
Some how the ipv6 does not apply. My ipv6 adresses work by Prefix deligation. Al vlans are working good, exept for the bandwith control.
When i try to use QOS i can select de ipgroups, also the ipv6. And then thoose rule do work. But is complex to setup for a small network and i just want to use bandwith control.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @nuijtenp
Thanks for posting in our business forum.
nuijtenp wrote
@Clive_A Hi Clive, the interfaxes are complety functionel with ipv6. All 4 vlans function as the should. I just can't control the bandwith over ipv6. If i try to make a new ipgroup via the interface off the bandwith control i also only can setup a ipv4 range. I seems that all off de ipv6 trafic is just not managed via bandwith control.
Ipgroups for ipv6 have been made and the work with QOS. But i want to use them with bandwith control.
It does not support IPv6. Confirmed with the dev.
- Copy Link
- Report Inappropriate Content
Hi @nuijtenp
Thanks for posting in our business forum.
If the function you configured does not specify the IPv6, Bandwidth Control, then it is not effective to the v6. You might wanna check if the interface displays the range of IPv6.
- Copy Link
- Report Inappropriate Content
@Clive_A Hi Clive, the interfaxes are complety functionel with ipv6. All 4 vlans function as the should. I just can't control the bandwith over ipv6. If i try to make a new ipgroup via the interface off the bandwith control i also only can setup a ipv4 range. I seems that all off de ipv6 trafic is just not managed via bandwith control.
Ipgroups for ipv6 have been made and the work with QOS. But i want to use them with bandwith control.
- Copy Link
- Report Inappropriate Content
Hi @nuijtenp
Thanks for posting in our business forum.
nuijtenp wrote
@Clive_A Hi Clive, the interfaxes are complety functionel with ipv6. All 4 vlans function as the should. I just can't control the bandwith over ipv6. If i try to make a new ipgroup via the interface off the bandwith control i also only can setup a ipv4 range. I seems that all off de ipv6 trafic is just not managed via bandwith control.
Ipgroups for ipv6 have been made and the work with QOS. But i want to use them with bandwith control.
It does not support IPv6. Confirmed with the dev.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 127
Replies: 3
Voters 0
No one has voted for it yet.