Early Access Omada SDN Controller_V5.15.6.4 Pre-Release Firmware(Released on Oct 18th, 2024)
This Article Applies to
Omada_SDN_Controller_v5.15.6.4 Windows (Windows 7/8/10/11/Server, 64bit Recommended)
Omada_SDN_Controller_v5.15.6.4_linux_x64.tar
Omada_SDN_Controller_v5.15.6.4_linux_x64.deb
Overview
We hope to offer you a chance to experience the new features added in the Controller v5.15.6.4 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.
Release Notes
New Features
1. Added support for Gateways: DR3650v, ER703WP-4G-Outdoor.
2. Added support for APs: EAP775-Wall, EAP625GP-Wall, EAP115-Bridge v2.0, EAP211-Bridge v2.0, EAP215-Bridge v2.0.
3. Added support to disable ports in the properties window of device.
4. Added support for batch import and export of Radius users in Site View > Settings > Network > Profile > RADIUS Profile > RADIUS Users.
5. Added support to configure DSL Gateway features in Site View > Settings > Wired&Wireless Networks > WAN Mode:
- Virtual WAN
- VoIP
- DSL Dialing
- TP-link DDNS
Enhancements
1. Optimized NAT Configuration, limit the entries of NAT according to Alias IP.
2. Optimized WLAN Optimization, added support to deploy Channel Width and Channel.
3. Optimized properties window, added support for Loopback Detection in Device > Properties window > Config > Services > Loopback Control.
4. Optimized the following features in Omada App:
- Added support for NTP configuration.
- Added support for Static Routing.
- Optimized properties window of the device
Notes
1. This version of the Controller is fully applied to the Omada APP of version 4.20 or above.
2. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
3. Since version 5.14.32.2, Omada Software Controller no longer supports upgrade from Controller v4.
4. Since version 5.14.32.2, Omada Software Controller(windows) only supports installation on Windows64-bit platform.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.
(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.
Firmware Download Link
-
Direct Download
Omada_SDN_Controller_v5.15.6.4_pre-release_windows
Omada_SDN_Controller_v5.15.6.4_pre-release_linux_x64_deb
Omada_SDN_Controller_v5.15.6.4_pre-release_x64_tar.gz
Additional Information
If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:
- Omada Controller version (previous and current)
- Device Model(s), Hardware and Firmware versions
- (if possible) A copy of the Log file and Backup Config file
If you decide to downgrade the controller before reporting the issue to TP-Link, it's suggested to save a copy of the current Log file and Backup Config file before you do that, which could help to investigate and address the issue quickly.
>> How to get the Log file and Backup Config file for Omada SDN Controller:
-
If your Windows software controller failed to get launched, please locate the controller installation path for the Log file.
-
If it's not a launch issue, you can export the Log file and Backup Config file in the local network.
-
For Omada Controller v5.8 or later version,
In the Global View, go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.6 or v5.7,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.5 or previous version,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file . Go to Settings > Services > Export Data > Running Log to export the Log file.
-
Update Log
Nov 27th, 2024:
Remove download links for all the controllers v5.15.6.4.
Oct 18th, 2024:
Provide the following controller firmware for early access.
Omada_SDN_Controller_v5.15.6.4_pre-release_windows
Omada_SDN_Controller_v5.15.6.4_pre-release_linux_x64_deb
Omada_SDN_Controller_v5.15.6.4_pre-release_x64_tar.gz
Recommended Threads
TP-Link Early Access Program Is Now Available!
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I get a notification that there is a new version, but it is the same version that is already installed. If I try to upgrade, the choice is repair or uninstall.
- Copy Link
- Report Inappropriate Content
I'm receiving the same notification starting today as well: "Controller 5.15.6.4 Build 20241016221424 is available."
- Copy Link
- Report Inappropriate Content
Thank you so much for your reply.
We have created a supported ticket for your.
Would you please check your email inbox and find the case ID TKID241046020 in the subject?
We wait for your reply.
- Copy Link
- Report Inappropriate Content
KimcheeGUN wrote
Crazy part is... I updated my home Ubuntu Controller and it took me a couple of days to get it up and running. By chance I had on it 18, upgraded it to 22, and seemed to work.
Out of pure laziness I left it on ubuntu 18.
My work controller was is on 22, and it was flawless.
I had to disconnect and reconnect the cloud access and it came back up.
- Copy Link
- Report Inappropriate Content
Upgrade completed without error from v5.13.30.7. The new UI is nice, like the new color palette. The big issue is that Cloud Access is broken, as a number of people have already mentioned. Hovering over the slider, clicking it doesn't do anything as the slider is "grayed out" as inactive. Any known workarounds?
EDIT: This isn't a workaround, but I migrated my Omada Controller and Site to a brand new Windows 11 server, which got the Cloud functionality working again.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Vincent-TP new interface is looking good, there are so many features added.
as promised in previous threads, anti tethering will be available in v5.15, where is this option located?
- Copy Link
- Report Inappropriate Content
Overall i like the new design, but what i dont like is the new Setting menu - a lot of mouse moving and searching for things in lists, compared to the current easy to navigate side bar.
Just my opinion.
- Copy Link
- Report Inappropriate Content
OrangeStreet wrote
@Vincent-TP Cloud access is stuck on "disconnected" now and cannot be disabled/re-enabled - I get a red circle when I hover over the slider. I have rebooted and tried to click numerous times and nothing changes. Otherwise it seems to work fine.
@OrangeStreet Seeing the exact same issue...Windows 11 Omada controller. No matter what I do, I cannot get Cloud connectivity working. I've tried looking through the config files within the Omada installation directory but can't find anything in there that correlates with that Cloud setting.
Also, are you using a TP-Link Omada Router/Gateway? I'm not, I use an OPNsense router...my switches/EAP's are all TP-Link Omada devices.
The slider-button is entirely deactivated and cannot be altered from any web browser that I've tried (Chrome, Edge, Firefox, etc.).
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 14065
Replies: 92
Voters 1
