Business Community > All Threads > Devices connected to easy managed switch does not get IP assigned by router
< All Threads

Devices connected to easy managed switch does not get IP assigned by router

Devices connected to easy managed switch does not get IP assigned by router

Devices connected to easy managed switch does not get IP assigned by router
Devices connected to easy managed switch does not get IP assigned by router
3 weeks ago - last edited 2 weeks ago

Hi everyone,

Hoping someone can point me (a beginner) in the right direction!

I have a basic setup with a R7406 gateway, ES205GP switch, and a single EAP670 AP powered through the switch. A connected windows computer is running the controller software with all devices adopted.

 

I want to use the spare ports on the switch to connect a couple of clients, but when I connect a client to a port on the switch it does not get an IP issued, only clients connected directly to the gateway do.

 

What have I done wrong with my configuration?

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Devices connected to easy managed switch does not get IP assigned by router-Solution
2 weeks ago - last edited 2 weeks ago

  @peterdeg 

 

I found the same problem, it works now :-) but it should be possible to enable All for easy managed switch

 

 

 

 

 

Recommended Solution
  1  
  1  
#5
Options
Re:Devices connected to easy managed switch does not get IP assigned by router-Solution
2 weeks ago - last edited 2 weeks ago

@ all

 

The problem is the missing "all" Profiles for Easy-Managed Switches. 

We need to manually create port profles and apply them (to the uplink ports too).

 

 

Recommended Solution
  1  
  1  
#6
Options
8 Reply
Re:Devices connected to easy managed switch does not get IP assigned by router
3 weeks ago

Hi @aksw127 

Thanks for posting in our business forum.

You probably need to wait for a while before you see they are synced to the controller.

They should be working I think. The switch syncs to the controller about their IPs. Note that the sync between devices to the controller on data like stats is not instant.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Devices connected to easy managed switch does not get IP assigned by router
3 weeks ago - last edited 3 weeks ago

  @aksw127 @Clive_A 

 

i ordered a pair of ES205GP v1.0 and have a similar problem, default lan works but none of my vlan (tagged and untagged). i have enabled Easy Managed Switch on all vlan, controller is Windows 5.15.6.4 Beta

Firmware Version ES205GP v1.0   1.0.1 Build 20240801 Rel.41455

 

 

 

 

Everything looks right but it doesn't work, Are there any more places to configure?

 

I have also tested firmware Version 1.0.0 Build 20240721 Rel.42902 with same result.

 

In stand alone is vlan ok, no problem. 

 

 

 

 

 

  0  
  0  
#3
Options
Re:Devices connected to easy managed switch does not get IP assigned by router
2 weeks ago - last edited 2 weeks ago

I was just going through the same pain. In looking through various configs, I noticed the uplink/downlink port profile setting on all the other switches use 'All' but that is not a selectable profile on the ES205G and ES205GP.

I managed to get things working by creating a profile 'All_VLANs' and adding all the tagged networks to it then selecting it for the uplink port on the two switches.

Devices are now getting addresses from my dhcp server (opnsense firewall) but the address is not being seen on the client list on the controller.

Given the firmware for the ES205G is v1.0.1 and the ES205GO is v1.0.0 I'm un-surprised there are 'quirks'

  0  
  0  
#4
Options
Re:Devices connected to easy managed switch does not get IP assigned by router-Solution
2 weeks ago - last edited 2 weeks ago

  @peterdeg 

 

I found the same problem, it works now :-) but it should be possible to enable All for easy managed switch

 

 

 

 

 

Recommended Solution
  1  
  1  
#5
Options
Re:Devices connected to easy managed switch does not get IP assigned by router-Solution
2 weeks ago - last edited 2 weeks ago

@ all

 

The problem is the missing "all" Profiles for Easy-Managed Switches. 

We need to manually create port profles and apply them (to the uplink ports too).

 

 

Recommended Solution
  1  
  1  
#6
Options
Re:Devices connected to easy managed switch does not get IP assigned by router
2 weeks ago

  @Wienumgebung 

 

yes I figured it out, I didn't think clear here for a while. but it should have been possible to enable the All profile on easy managed switch, but ok, now I know.

 smiley

  0  
  0  
#7
Options
Re:Devices connected to easy managed switch does not get IP assigned by router
a week ago

  @aksw127 @MR.S 

 

Initial feedback from support:

The Easy Managed switches support a limited number of VLANs, but the profile ALL may contain a large number of VLANs, so there are design limitations in place. Currently, these switches do not support selecting 'All' on the ports; you will need to create a profile yourself to add VLANs.

 

Makes sense, they're only small devices.

Lack of ip addresses being shown still being looked at.

  0  
  0  
#8
Options
Re:Devices connected to easy managed switch does not get IP assigned by router
Sunday

And to close it all off..

 

After testing and confirmation by our senior engineers, the conclusion is that it is currently not possible to display the client's IP on the controller's client list for Easy Managed models such as ES205G. This is because Easy Managed switches do not collect client IP information and therefore do not report the IP to the controller. Hence, the phenomenon you mentioned is normal.

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 233

Replies: 8

Related Articles
Unmanaged switch connect to managed switch
539 0
Will this managed switch work with Omada?
930 0
Managed switch with more than 32 vlans
500 0
Managed Switch
730 0
Omada managed switch to any other unmanaged switch question
2556 0
Switch cant be managed when connected via tagged VLAN
474 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.