Home

Forums

Stories

Knowledge Base

Business Community > All Threads > ER706W-4G can't connect to 5Ghz

< All Threads

ER706W-4G can't connect to 5Ghz

locn

2024-11-11 08:17:14 - last edited 2024-11-15 06:10:29

Posts: 17

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-03-24

ER706W-4G can't connect to 5Ghz

2024-11-11 08:17:14 - last edited 2024-11-15 06:10:29

Model: ER706W-4G

Hardware Version: V1

Firmware Version: ER706W-4G_V1_1_0 1.20240723.67170(4555)

No matter what i try i can't get any pc's or phones to connect to the 5Ghz of this router. 2.4Ghz can connect but is quite slow.

iPhones say incorrect password. PC's just say can't connect to this network.

I know the password is correct. At this stage i'm putting it down to hardware fault.

Things i've tried:

disabled the 2.4Ghz just in case.
change the channel width from auto to all the other ones
change the channel from auto to all the other ones
change the power from 10 - 20
enabled and disabled
rebooted router

the system log says:

client failed to connect to [ mac ] with SSID [ my ssid ] on channel 48 because WPA Authentication times out / failed.

is there anything else I can try before i have to try to send it back.

TIA.

1 Accepted Solution

Clive_A

2024-11-12 01:09:02 - last edited 2024-11-15 06:10:29

Posts: 5981

Helpful: 2947

Solutions: 1375

Stories: 0

Registered: 2023-06-09

Re:ER706W-4G can't connect to 5Ghz-Solution

2024-11-12 01:09:02 - last edited 2024-11-15 06:10:29

Hi @locn

Thanks for posting in our business forum.

locn wrote

the system log says:

client failed to connect to [ mac ] with SSID [ my ssid ] on channel 48 because WPA Authentication times out / failed.

is there anything else I can try before i have to try to send it back.

The error is typically considered a symptom of a weak signal. Either the client device antenna is too bad, or the transmit power cannot travel far to maintain a good connection.

And in addition, what kind of encryption do you use for the WIFI? You have to make sure your device supports the WPA3 if you force it on WPA3.

Usually, WPA2-AES is still recommended.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

2 Reply

Clive_A

2024-11-12 01:09:02 - last edited 2024-11-15 06:10:29

Posts: 5981

Helpful: 2947

Solutions: 1375

Stories: 0

Registered: 2023-06-09

Re:ER706W-4G can't connect to 5Ghz-Solution

2024-11-12 01:09:02 - last edited 2024-11-15 06:10:29

Hi @locn

Thanks for posting in our business forum.

locn wrote

the system log says:

client failed to connect to [ mac ] with SSID [ my ssid ] on channel 48 because WPA Authentication times out / failed.

is there anything else I can try before i have to try to send it back.

The error is typically considered a symptom of a weak signal. Either the client device antenna is too bad, or the transmit power cannot travel far to maintain a good connection.

And in addition, what kind of encryption do you use for the WIFI? You have to make sure your device supports the WPA3 if you force it on WPA3.

Usually, WPA2-AES is still recommended.

Information

Helpful: 0

Replies: 2

ER706W-4G can't connect to 5Ghz

ER706W-4G can't connect to 5Ghz

Information

Voters 0

Tags