Establish connection between two buildings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Establish connection between two buildings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Establish connection between two buildings
Establish connection between two buildings
2013-08-23 11:28:20
Region : Argentina

Model : TL-WA5210G

Hardware Version : V2

Firmware Version :

ISP :


Hi

I am having an internet connection from ISP in one building. The internet cable is dropped in building A. I want to establish a bridge from building A to building B using two tp-link wa5210g devices and use a router in building B to dial the internet connection.

Please guide me how to do it. The distance between buildings is 1.5 KM and having a clear line of sight.


Thanks.
  0      
  0      
#1
Options
2 Reply
Re:Establish connection between two buildings
2013-08-23 15:47:59
  0  
  0  
#2
Options
Re:Establish connection between two buildings
2013-08-23 21:55:44
i dont advice Bridge mode,
1-5210s will work at 50% of its capacity
2-you will have to use WEP security, do you really want to use WEP today
I want to establish a bridge from building A to building B

that means you are in urban area,
1-do you really want to use 2.4Ghz crowded band
2-better use 5Ghz band (if you are able, due to country regulations) if so use 7510
3-dont forget the link will be in 5Ghz and you will need to add at point B any router, like the 740 or 741 as router or as AP (this apply to 5210 too)
4-in both cases 2.4 or 6Ghz use
building A as AP mode http://www.tp-link.com/en/article/?faqid=393
and building as Client mode http://www.tp-link.com/en/article/?faqid=318
and if you decide for 7510 read http://www.tp-link.com/en/article/?faqid=462
  0  
  0  
#3
Options