configure load balancer 2 static public IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

configure load balancer 2 static public IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
configure load balancer 2 static public IP
configure load balancer 2 static public IP
2013-08-29 13:35:10 - last edited 2021-08-21 03:52:22
Region : Argentina

Model : TL-ER6120

Hardware Version : V1

Firmware Version : 20111114 Rel 52682

ISP : telefonica movistar


I'm trying to configure the load balancer TL-ER6120 with one WAN ADSL router Zyxel P660HWtelephone
The idea is to try it first with one WAN
I have 2 static public IP 80.2.194.205 and 80.34.254.3
Within the balancer there an option for the WAN, either WAN1 or WAN2 static IP, someone has had to set this up before?

I have heard that the router must be in bridge mod, not routing...
NAT must be execute the load balancer not the router??


Someone who has suffered this war and I can help???
Any screenshot to configure it???

Thanks in advance for the help
  0      
  0      
#1
Options
1 Reply
Re:configure load balancer 2 static public IP
2014-02-13 17:29:35 - last edited 2021-08-21 03:52:22
I am not very clear about your demand. maybe you have to configure your ADSL router to be in bridge mode. er6120 support many connection types at its WAN side, including static ip, dynamic ip, PPPoE and so on.
  0  
  0  
#2
Options