Load Balancer / TL-R470+ Configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Load Balancer / TL-R470+ Configuration
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-25
2017-08-25 20:47:44 - last edited 2021-04-19 12:09:23
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-25
Load Balancer / TL-R470+ Configuration
2017-08-25 20:47:44 - last edited 2021-04-19 12:09:23
Tags:
Model :
Hardware Version :
Firmware Version :
ISP :
I have a TP-Link load balancer and the Deco M5 System. Since the deco uses the 192.168.0.x subnet, I placed the load balancer on the 192.168.1.1 IP address, but often the deco system has no throughput even though the load balancer is working. So i tried to place the load balancer on the 192.168.0.x subnet. Here is worked perfectly BUT the DHCP went crazy giving some devices 192.168.0.x addresses and some other with 192.168.1.x addresses. How should we work with Deco M5 & a Load balance ????
Hardware Version :
Firmware Version :
ISP :
I have a TP-Link load balancer and the Deco M5 System. Since the deco uses the 192.168.0.x subnet, I placed the load balancer on the 192.168.1.1 IP address, but often the deco system has no throughput even though the load balancer is working. So i tried to place the load balancer on the 192.168.0.x subnet. Here is worked perfectly BUT the DHCP went crazy giving some devices 192.168.0.x addresses and some other with 192.168.1.x addresses. How should we work with Deco M5 & a Load balance ????
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
5 Reply
Posts: 763
Helpful: 33
Solutions: 0
Stories: 0
Registered: 2016-05-27
Re:Load Balancer / TL-R470+ Configuration
2017-08-28 17:11:19 - last edited 2021-04-19 12:09:23
You can set the deco in AP mode. The load balance router will be the only DHCP server to give IP addresses.
http://www.tp-link.com/us/faq-1842.html
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-25
Re:Load Balancer / TL-R470+ Configuration
2017-08-29 00:06:46 - last edited 2021-04-19 12:09:23
Shield101 wrote
You can set the deco in AP mode. The load balance router will be the only DHCP server to give IP addresses. http://www.tp-link.com/us/faq-1842.html
Done that and the load balancer works for a while then no throughput. I also tried another load balancer (my old Cisco RV042) and had the same problems. Just now I have set the balancer into backup mode.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1341
Helpful: 309
Solutions: 6
Stories: 0
Registered: 2016-04-19
Re:Load Balancer / TL-R470+ Configuration
2017-09-05 15:42:26 - last edited 2021-04-19 12:09:23
How does the deco system connect to the load balancer? Can you share a network map? And is the deco running the latest frimware version, the build 20170820 one?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2019-06-11
Re:Load Balancer / TL-R470+ Configuration
2019-06-11 13:29:08 - last edited 2021-04-19 12:09:23
I am using TL R470+ but unable to configure the 2 ISPs . It provides less speed compared to single ISP ..
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 747
Helpful: 115
Solutions: 18
Stories: 0
Registered: 2018-07-19
Re:Re:Load Balancer / TL-R470+ Configuration
2019-06-12 09:47:16 - last edited 2021-04-19 12:09:23
Subhanil wrote
I am using TL R470+ but unable to configure the 2 ISPs . It provides less speed compared to single ISP ..
Hi Subhanil
Please note that R470T+ only supports up to 100Mbps. And if you want to get the speed which more that single ISP, you need to use the application of "multiple session", like P2P download, otherwise the data will pass single WAN port only.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-25
2017-08-25 20:47:44 - last edited 2021-04-19 12:09:23
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-25
Information
Helpful: 0
Views: 1705
Replies: 5
Voters 0
No one has voted for it yet.
Tags
Related Articles
Report Inappropriate Content
Transfer Module
New message