Business Community > All Threads > Http / https passthrough on ER605
< All Threads

Http / https passthrough on ER605

Http / https passthrough on ER605

Http / https passthrough on ER605
Http / https passthrough on ER605
2025-02-28 18:03:30 - last edited 2025-04-21 06:25:45
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version:

I am trying to pass HTTP and HTTPS through the WAN to one of my internal servers. The wan port pings correctly from outside (after unchecking the disable ping from wan), and the router pings the inside server with no problems. I have setup both through NAT to take 443 and 80 through to the internal server, but I when I try http(or s)://outside.wan.address I get a cannot connect.

 

Anybody know what I am doing wrong? Is the management function conflicting with my passthrough?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Http / https passthrough on ER605-Solution
2025-03-03 01:45:57 - last edited 2025-04-21 06:25:45

Hi @Primotex

Thanks for posting in our business forum.

To port forward the 80 or 443, you need to free the router from the two ports.

Standalone mode, you change the HTTPS and HTTP port to a different one. Then you can port forward it.

 

Controller mode cannot bypass that as the router keeps using the 80 and 443. You cannot change the router's.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Http / https passthrough on ER605-Solution
2025-03-03 01:45:57 - last edited 2025-04-21 06:25:45

Hi @Primotex

Thanks for posting in our business forum.

To port forward the 80 or 443, you need to free the router from the two ports.

Standalone mode, you change the HTTPS and HTTP port to a different one. Then you can port forward it.

 

Controller mode cannot bypass that as the router keeps using the 80 and 443. You cannot change the router's.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 272

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.