Port vlan trunk option
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Port vlan trunk option
Region : UnitedStates
Model : TL-SL2218
Hardware Version : Not Clear
Firmware Version :
ISP :
I am interested in purchasing and setting up a TP-Link TL-WA701ND access point and a TP-Link Smart Switch model SL-2218. I will be assigning SSID vlan tags at the access point. There are two user guides for the switch, TL-SL2218_V1_User_Guide.pdf which indicates that switch ports can be set as Access, Trunk and General and the other guide, TL-SL2218_V1_User_Guide_19100010972.pdf, does not show Access,Trunk,General types at all. I am assuming that setting the port type to Trunk is necessary to use SSID tags from the AP. Which guide is correct for this switch that will be purchased new in the next few days. Does this switch allow SSID vlan tags from the WA701ND to be used. Thank you for any insight that can be provided.
Model : TL-SL2218
Hardware Version : Not Clear
Firmware Version :
ISP :
I am interested in purchasing and setting up a TP-Link TL-WA701ND access point and a TP-Link Smart Switch model SL-2218. I will be assigning SSID vlan tags at the access point. There are two user guides for the switch, TL-SL2218_V1_User_Guide.pdf which indicates that switch ports can be set as Access, Trunk and General and the other guide, TL-SL2218_V1_User_Guide_19100010972.pdf, does not show Access,Trunk,General types at all. I am assuming that setting the port type to Trunk is necessary to use SSID tags from the AP. Which guide is correct for this switch that will be purchased new in the next few days. Does this switch allow SSID vlan tags from the WA701ND to be used. Thank you for any insight that can be provided.
